• Free shipping on online orders over $25 within the contiguous US.
DA 6881
$2,050.00

DA 6881

Downdraft extractor system optional external or internal blower for maximum versatility.
  • Striking design - telescopic canopy 30 (762) in (mm) inches wide.
  • Practical - 15-minute automatic blower run-on
  • Suitable for every home - vented or recirculating
  • For perfect functionality - accessories for proper venting

Your exclusive advantages

Inside the Box

  • Reducer from 150 to 125 mm Ø

Product data sheet

Construction type
Downdraft extractor system
Design
ColorStainless steel
Variable height available as special order
Variable width available as special order
Edge extraction
Operating modes
Recirculated modeConvertible
Recirculation conversion kit (order separately)DUU 2900-900
OdorFree charcoal filter (order separately)DKF18-900
Control panel
Electronic controls
Light-touch controls
Power levels (number excl. Intensive)3
Intensive setting
Run-on time 15 min.
Hood in Motion
Filter system
Dishwasher-safe grease filters2
Lighting
Number x W1x6W
Light intensity in Lx280 lx
Color temperature in K4000 Kelvin
Safety
Safety shut-off
Single-ply safety glass (ESG)
Technical data
Overall min. height for vented and external in in. (mm)41 1/2 (1052)
Overall max. height for vented and external in in. (mm)41 1/2 (1052)
Overall min. height for recirculation in in. (mm)41 1/2 (1052)
Overall max. height for recirculation in in. (mm)41 1/2 (1052)
Canopy width in in. (mm)30 (762)
Canopy height in in. (mm)25 1/2 (646)
Depth of hood canopy in in. (mm)4 3/4 (120)
Net weight in lbs. (kg)52 (23.5)
Length of electrical wire in ft. (m)4 (1.5)
Standard plug fitted
Total connected load in kW0.35
Voltage in V120
Fuse rating in A10
Frequency in Hz60
Number of phases1
Installation notes
Vent connection top,rear,side,bottom
Diameter of vent connection in in. (mm)6 (150)
Show all technical details
Downloads, CAD, & apps

Follow the link and you will find all the resources you need for planning and installing any of our products

Whether you are looking to replace an appliance or plan a new kitchen – you will find all the relevant installation drawings for your Miele appliance here. Please note that our products should only be installed and maintained by authorized experts. In the event of queries, please call us for some no-obligation advice!

Descriptions

DA 6881, DA 6891 Downdraft (Installation drawing)

1) The DAG 600 motor can be rotated for installation

so exhaust air can be extracted upwards

left

right or downwards.

2) The connection box can be positioned anywhere in the cabinet. The DA 6891 can be mounted to the left

right or behind the fan.

3) Cover for use with the DAG 1000 external fan. The DAG 600 or the cover for the DAG 1000 fan can also be installed in the same position at the back of the appliance.

Descriptions

DA 6881, DA 6891 Downdraft (Installation drawing)

1) Stepped cut-out for granite or marble worktops

2) If downdraft system and hob are installed in separate cut-outs it is important to ensure sufficient stability of ridges.

Descriptions

DA 6881, DA 6891 Downdraft (Installation drawing)

1) Exhaust air can be extracted to the left or right

2) Exhaust air extraction downwards

a) Hob overlap

b) Hob cut-out

3) If a downdraft system and a hob are installed in separate cut-outs it is important to ensure sufficient stability of ridges.

If the appliances is installed behind the downdraft system it must be ensured that there is adequate space.

  • Subject to technical changes; no liability accepted for the accuracy of the information given.
To top of page