Product Information
Inside the Box
- Non-return flap
DAS 2620
- Subject to technical changes; no liability accepted for the accuracy of the information given.
Product Information
Inside the Box
- Non-return flap
Your advantages
Stainless-steel grease filters (10-layer)
Easy to use and effective against grease
Miele CleanCover
Convenience and safety in detail
Handcrafted in Germany
Each Miele ventilation hood is unique
Safety turn off
Always on the safe side
Active AirClean filter
A completely odor-free kitchen
Stainless-steel grease filters (10-layer)
Easy to use and effective against grease
Miele CleanCover
Convenience and safety in detail
Product data sheet
| Built-in ventilation hood | • |
| Recirculated mode | Convertible |
| Recirculation conversion kit (order separately) | DUU 151 |
| Color | Stainless steel |
| Electronic controls | • |
| Number of dishwasher-safe stainless-steel grease filters | 1 |
| LED ClearView lighting | • |
| Number x W | 1 x 3,0 W |
| Light intensity in Lx | 330 lx |
| Color temperature in K | 3500 Kelvin |
| Dual-action blower | • |
| AC motor | • |
| Safety shut-off | • |
| Canopy width in in. (mm) | 23 1/2 (596) |
| Canopy height in in. (mm) | 1 1/2 (36) |
| Depth of hood canopy in in. (mm) | 10 3/4 (273) |
| Minimum distance above electric cooktops in in. (mm) | 24 1/8 (610) |
| Minimum height above gas cooktop (max. 12.6 kW total power, burner ≤ 4.5 kW) in mm | 26 (660) |
| Net weight in lbs. (kg) | 31 (14.0) |
| Length of electrical wire in ft. (m) | 2 (0.8) |
| Standard plug fitted | • |
| Total connected load in kW | 0.35 |
| Voltage in V | 120 |
| Fuse rating in A | 15 |
| Frequency in Hz | 60 |
| Number of phases | 1 |
| Vent connection at top | • |
Optional products and accessories
- Mounting planPDF
- Product sheetPDF
- Warranty conditionsPDF
- Operating and Installation instructionsPDF
Follow the link and you will find all the resources you need for planning and installing any of our products
- fbxZIP
- ifcZIP
- dwgZIP
- rfaZIP
- rvtZIP
Follow the link and you will find all the resources you need for planning and installing any of our products
DAS2620, DAS2620 EXTA, DAS4620, Installation drawings
1) The front section of the wall unit must be fitted with a base panel to secure the cooker hood. If the appliance is fitted further back
e.g. to accommodate a front panel
then the shelf depth should be deeper accordingly.
2) If a partition wall is to be provided in the unit
it must be removable.
3) Extraction
recirculation with conversion kit DUU 150.
* In this installation situation
the deflector plate is flush with the front edge of the housing unit carcase.
If you wish to position the cooker hood further forward or further back (e.g. because it has a front panel)
dimensions have to be adapted accordingly.
Extraction: the height of the wall unit and the cut-out dimensions must take into account any accessories fitted
e.g. silencer
recirculation hood conversion kit).
DAS2620, drawing - US
1) Exhaust air
mounted accessories must be taken into account for dimensions of cabinet height and cutouts.
2) Exhaust air
recirculation with DUU 150 conversion kit.
*In this installation situation
the screen is flush with the front edge of the cabinet. If the cooker hood is positioned further to the front or rear (e.g. when using a front panel)
the dimensions must be adjusted accordingly.
- Subject to technical changes; no liability accepted for the accuracy of the information given.