The filters in the wash cabinet can become clogged with dirt which collects over time. The level of dirt and time it takes before the filters need cleaning will vary depending on use.
The message Check filters will appear in the display after every 50 program sequences (factory default setting).
Check the filter combination in the base of the wash cabinet.
Clean the filter combination if necessary.
Then confirm the message with OK.
The message will disappear.
The display will change to show the program selection menu.
You can set the interval for this message to appear to between 30 and 60 program sequences:
Select the Settings menu.
Select the “Check filters” menu option.
Select the desired interval.
Confirm with OK.
