The FilterBag holder is not correctly engaged in the vacuum cleaner housing.
Place the coiled part of the spring on the cross-shaped pin in the middle of the FilterBag holderĀ (1, red).
Hook the spring arms behind the clips on the FilterBag holderĀ (2, green).
Place the retainers of the FilterBag holder (3) over the guides in the vacuum cleaner housing (4).
Hold the FilterBag holder almost vertically during this process.
The retainers of the FilterBag holder must rest loosely on the guides in the vacuum cleaner housing (5).
Now position your thumbs on the arrows of the FilterBag holder (7) and your fingers on the sides of the vacuum cleaner housing (8).
Push the FilterBag holder straight down with your thumbs until you hear an audible click.
The retainers of the FilterBag holder (3) are engaged in the guides in the vacuum cleaner housing (4). The FilterBag holder can be easily pressed down and springs up again automatically.
A catch element prevents the dust compartment lid from closing.
You can only close the dust compartment lid of the vacuum cleaner housing when the FilterBag is inserted.
Do not force it.
If you need a new FilterBag holder or a new spring for the holder, please contact Miele Service.
