Activating pairing mode based on software version
To connect the robot vacuum cleaner to the WiFi network, you need to activate pairing mode manually based on the software version.
Software version 1.05–1.09:
Touch the “Base” sensor control and hold it down for more than 2 seconds. The WiFi display flashes for several seconds and then lights up continuously.
Touch the “Start/Pause” sensor control and the “Base” sensor control at the same time and hold them down for more than 2 seconds. The “Base” sensor control flashes. Pairing mode is activated.
Software version higher than 1.10:
Press the “Base” sensor control and hold it down for more than 2 seconds. “WiFi” is shown in the display. Pairing mode is activated automatically.
