The hot water faucet has not been opened.
Terminate the wash program.
Open the hot water faucet.
Select the program and start it again.
Support for yourWasher
Fault F15
Fault F15 appears in the display of the washing machine/washer-dryer. The water inlet is blocked or restricted.
The hot water inlet filter is soiled.
Clean the hot water inlet filter:
Turn off the hot water faucet.
Unscrew the water inlet hose from the hot water faucet.
Remove the rubber seal (1) from the recess.
Hold the free end of the water inlet hose upside down.
The plastic filter (2) will fall out.
Clean the hot water inlet filter.
Never forget to put the hot water inlet filter back in place after cleaning.
Re-assemble in reverse order.
Turn on the hot water faucet and check that the connection is watertight.
If water drips out, tighten the connection.
The hot water flow pressure in the water line is too low.
When the hot water faucet is fully open, at least 5 L of water should flow out of it within 15 s.
Contact the facility manager or a plumber.
The water connection pressure in the water line is too low and cannot be increased.
Please contact Miele Customer Service.
Manual finder
Here you will find the operating instructions for your Miele appliances.
Find your manual
Support 24/7
Use our contact form to describe your request. Miele Service will get back to you as soon as possible.
Contact us