A software update includes adding a buzzer at the end of the program for some washing machines. The new software version activates the buzzer as standard.
The buzzer sounds to let you know that it is the end of the program. Depending on the type of washing machine, you can use the programmable function to set the buzzer duration and the programmable function to set the buzzer volume or switch off the buzzer.
Buzzer duration programmable function
The buzzer sounds to let you know that it is the end of the program. You can decide how long the buzzer should sound for.
Options
= The buzzer sounds 3 times at the end of the program.
= The buzzer sounds until the washing machine switches off automatically (max. 1 hour).
Buzzer programmable function
The buzzer sounds to let you know that it is the end of the program.
Options
= Buzzer is deactivated.
= Buzzer is set to normal.
= Buzzer is set to loud.
Opening programming level, selecting programmable function, saving settings
1. Program selector
2.Start/Add laundry sensor control
3. Time display
4. or sensor controls (arrows)
Opening the programming level
Programming is carried out in 8 steps (, , ... ) using the sensor controls.
Before you begin, ensure the following:
The washing machine is switched on (the program selector is pointing to a wash program).
The washing machine door is open.
Touch the Start/Add laundry sensor control and hold it down while carrying out steps –.
Close the washing machine door.
Wait until the Start/Add laundry sensor control lights up constantly ...
... and then release the Start/Add laundry sensor control.
After approximately 4 seconds, will light up on the time display.
Choosing and selecting the programmable function
The number of the programmable function will appear on the time display as and a number: e.g., .
Touch the or sensor control to scroll to the next or previous programmable function.
Confirm the selected programmable function by touching the Start/Add laundry sensor control.
Editing and saving the programmable function
You can either switch a programmable function on/off or select different options.
Touch the or sensor control to switch the programmable function on/off or to select an option.
Confirm the chosen selection with the Start/Add laundry sensor control.
The number of the programmable function, e.g., , will then light up again.
Exiting the programming level
Turn the program selector to the position.
The settings you have selected are now stored in the memory. You can alter the settings again at any time.
For additional information on your washing machine, please refer to the operating instructions (see “Programmable functions”).
