SearchFind a store
Support for yourVacuum Drawer

Start a drying cycle lights up

The Start a drying cycle sensor control lights up after a drying cycle has finished. The drawer cannot be used.

The drying cycle failed to remove all of the moisture from the oil circulation system in the vacuum pump. The drawer is locked and cannot be used for 1 hour.

Wait for 1 hour and then carry out another drying cycle as follows:

The vacuum chamber must be free from objects and liquid residues when carrying out the drying cycle.

Clean and dry the vacuum chamber.

Touch the  Start a drying cycle sensor control.

Close the glass lid.

The drying cycle starts. The  Start a drying cycle sensor control will flash yellow throughout the entire process.

You can cancel the drying cycle with the  Start a drying cycle sensor control.

If a drying cycle is canceled, it must be repeated after the remaining vacuum sealing processes have elapsed or when the drawer is switched on again.

When the drying cycle has finished, a signal sounds and the Start a drying cycle sensor control goes out. You can now use the drawer again as usual.

The last selected vacuum setting and sealing level are displayed on the control field.

Manual finder

Manual finder

Here you will find the operating instructions for your Miele appliances.
Find your manual
Book a technician

Book a technician

We will happily take your repair booking online.
Schedule a service call
Support 24/7

Support 24/7

Use our contact form to describe your request. Miele Service will get back to you as soon as possible.
Contact us