Support for your

Tumble Dryer

Drum lighting does not come on

The drum lighting in the tumble dryer does not come on.

Switch the tumble dryer off and then on again.

To switch the drum lighting on, open the door of the tumble dryer.

The drum lighting is designed to last a long time and should not normally need to be replaced.

If you have tried everything but the drum lighting still does not come on, contact Miele Service.

The tumble dryer is damaged.

Faults affecting the drum lighting or electronic may occur.

The new lamp must not exceed the maximum rating specified on the data plate and cap.

Only source the new high-temperature-resistant lamp from a Miele dealer or Miele Service.

After changing the lamp, make sure that the cap is correctly seated above the door opening to ensure a watertight fit.

To change the lamp, proceed as follows:

Before changing the lamp, unplug the electrical plug of the appliance from the socket. Alternatively, switch off the breaker.
Open the appliance door.
Depending on the model, unscrew the cap that is located above the door opening inside the tumble dryer or open the cover in the door opening.
Replace the lamp.
Put the cap back in place.

Make sure that the cap is seated securely. If the cap is loose, there is a risk of moisture entering and causing a short circuit.

Here you will find the operating instructions for your Miele appliances.

We will happily take your repair booking online.

Use our contact form to describe your request. Miele Service will get back to you as soon as possible.