The residual water drawer has not been detected.
Switch the steam ironing system off and back on again.
Support for yourFashionMaster
Drain fault
Drain fault appears in the steam ironing system display.
After switching the steam ironing system off and back on, the residual water drawer has not been detected.
Switch the steam ironing system off.
Clean and dry the metal contacts in the residual water drawer.
Switch the steam ironing system back on and follow the instructions shown on the display.
Remove the residual water drawer and fill it with fresh water.
Put the residual water drawer back into the tower.
Remove the residual water drawer again if you are prompted to do so by the appropriate message in the display.
Empty the residual water drawer and dry the metal contacts.
Put the residual water drawer back into the tower.
The steam ironing system is ready for use again and continues with the process that had been started when the fault was detected.
There is a fault with the steam ironing system.
No remedy possible.
If the fault persists, please contact us or book a repair appointment online.
Manual finder
Here you will find the operating instructions for your Miele appliances.
Find your manual
Support 24/7
Use our contact form to describe your request. Miele Service will get back to you as soon as possible.
Contact us