The fuse or breaker has tripped.
Reset the fuse or breaker (see data plate for minimum protection rating).
Support for yourCooktop
Cooktop
Induction cooktop not responding
The induction cooktop no longer responds to the controls.
The system lock or safety lock is activated.
Deactivate the system lock/safety lock as described in the operating instructions.
There is a technical fault.
Disconnect the appliance from the power supply for approx. 1 minute.
Turn off the relevant breaker. Or remove the screw-in fuse completely. Or switch off the residual current device.
Switch the breaker back on.
Cooktop with touch display:
Your fingertips are covered.
Touch the touch display with bare fingers only.
Wipe protection has been activated.
Deactivate wipe protection.
You touched the touch display while holding an item of cookware.
Only touch the touch display when both of your hands are free.
The touch display is dirty.
Remove any dirt or grime.
Manual finder
Here you will find the operating instructions for your Miele appliances.
Find your manual
Support 24/7
Use our contact form to describe your request. Miele Service will get back to you as soon as possible.
Contact us