Fault FE 47 appears on the display of an induction cooktop cooking zone.
Check whether the fan is being blocked by objects in a drawer below the cooktop, or by dust or similar substances, and remove the blockage accordingly.
Check that the minimum clearances for installing the cooktop have been adhered to. The minimum clearances are described in the operating and installation instructions. There must be a clearance of at least 1/2" (15 mm) between the bottom edge of the cooktop and the interim shelf or oven.
Once this clearance has been established, you must disconnect the cooktop from the power supply in order to clear the fault message.
If the fault persists, please contact us or book a repair appointment online.
