Activating pairing mode based on software version
To connect the robot vacuum cleaner to the Wi-Fi network, you need to activate pairing mode manually based on the software version.
Software version 1.05–1.09:
Press the “Base” sensor control and hold it down for more than 2 seconds. The Wi-Fi display flashes for several seconds and then lights up continuously.
Touch the “Start/Pause” sensor control and the “Base” sensor control at the same time and hold them down for more than 2 seconds. The “Base” sensor control flashes. Pairing mode is activated.
Software version higher than 1.10:
Press the “Base” sensor control and hold it down for more than 2 seconds. “Wi-Fi” is shown on the display. Pairing mode is activated automatically.
