Product Information
Inside the Box
- Reducer from 150 to 125 mm Ø
DA 6881
- Subject to technical changes; no liability accepted for the accuracy of the information given.
Product Information
Inside the Box
- Reducer from 150 to 125 mm Ø
Your advantages
Handcrafted in Germany
Each Miele ventilation hood is unique
Safety turn off
Always on the safe side
Active AirClean filter
A completely odor-free kitchen
Edge vented
Blowercy single panel instead of metal grease filter
Product data sheet
| Downdraft extractor system | • |
| Recirculated mode | Convertible |
| Recirculation conversion kit (order separately) | DUU 2900-900 |
| OdorFree charcoal filter (order separately) | DKF18-900 |
| Color | Stainless steel |
| Edge extraction | • |
| Electronic controls | • |
| Power levels (number excl. Intensive) | 3 |
| Run-on time 15 min. | • |
| Hood in Motion | • |
| Dishwasher-safe grease filters | 2 |
| Number x W | 1x6W |
| Light intensity in Lx | 280 lx |
| Color temperature in K | 4000 Kelvin |
| Safety shut-off | • |
| Single-ply safety glass (ESG) | • |
| 41 1/2 (1052) | |
| 41 1/2 (1052) | |
| Overall min. height for vented and external in in. (mm) | 41 1/2 (1052) |
| Overall max. height for vented and external in in. (mm) | 41 1/2 (1052) |
| Overall min. height for recirculation in in. (mm) | 41 1/2 (1052) |
| Overall max. height for recirculation in in. (mm) | 41 1/2 (1052) |
| Canopy width in in. (mm) | 30 (762) |
| Canopy height in in. (mm) | 25 1/2 (646) |
| Depth of hood canopy in in. (mm) | 4 3/4 (120) |
| Net weight in lbs. (kg) | 52 (23.5) |
| Length of electrical wire in ft. (m) | 4 (1.5) |
| Standard plug fitted | • |
| Total connected load in kW | 0.35 |
| Voltage in V | 120 |
| Fuse rating in A | 10 |
| Frequency in Hz | 60 |
| Number of phases | 1 |
| Vent connection top,rear,side,bottom | • |
| Diameter of vent connection in in. (mm) | 6 (150) |
Optional products and accessories
- Product sheetPDF
- Warranty conditionsPDF
- Operating and Installation instructionsPDF
Follow the link and you will find all the resources you need for planning and installing any of our products
DA 6881, DA 6891 Downdraft (Installation drawing)
1) The DAG 600 motor can be rotated for installation
so exhaust air can be extracted upwards
left
right or downwards.
2) The connection box can be positioned anywhere in the cabinet. The DA 6891 can be mounted to the left
right or behind the fan.
3) Cover for use with the DAG 1000 external fan. The DAG 600 or the cover for the DAG 1000 fan can also be installed in the same position at the back of the appliance.
DA 6881, DA 6891 Downdraft (Installation drawing)
1) Stepped cut-out for granite or marble worktops
2) If downdraft system and hob are installed in separate cut-outs it is important to ensure sufficient stability of ridges.
DA 6881, DA 6891 Downdraft (Installation drawing)
1) Exhaust air can be extracted to the left or right
2) Exhaust air extraction downwards
a) Hob overlap
b) Hob cut-out
3) If a downdraft system and a hob are installed in separate cut-outs it is important to ensure sufficient stability of ridges.
If the appliances is installed behind the downdraft system it must be ensured that there is adequate space.
- Subject to technical changes; no liability accepted for the accuracy of the information given.