PG 8583 CD [WW AD CM OIL]Laboratory glassware washerwith liquid dispensing, DryPlus, conductivity monitoring & oil resistant seals.
- Perf./cycle, e.g., 128 laboratory flasks
Further stacking optionsAlternatively, 98 pipettes can be reprocessed per cycle with further laboratory glassware.
- Efficient use of resources - variable speed heater pump
The heart of perfect resultsIn the individual programs the speed of the pump and thus the wash pressure is adjusted in line with the relevant requirements – high pressure facilitates the removal of stubborn soiling, whilst low pressure guarantees the complete wetting of all the wash items. As a result, the consumption of water and energy remains particularly low with optimum wash pressure at all times.
- Safety - Wash pressure, spray arm and conductivity monitoring
For reliable resultsOutstanding preparation results are achieved because the jet pressure and spray arms are monitored continuously and a decline in jet pressure or load blockage is detected immediately In addition, any deviations from the prescribed conductivity of the water, particularly in the final rinse, are detected.
- Efficient hot air drying - DryPlus
Efficient dryingDryPlus hot air drying is the optimum solution for hollow instruments or narrow-lumened laboratory glassware. The upstream H14 HEPA filter ensures optimum particle separation from the drying air. The filter is easily accessible via a side unit.
- Total security - link to process documentation possible
End-to-end documentationThe optional addition of a module for process documentation is provided via a communication slot. The Ethernet module is used for documentation via software. The RS 232 module must be used for documentation within a USB solution or via a printer.
PG8583 CD [WW AD CM OIL]