Compare
PG 8593 [WW AD 208V]
Laboratory glassware washer with liquid dispensing & DryPlus drying.
- Performance/cycle, e.g., 128 laboratory bottlesFurther stacking options
Alternatively, 98 pipettes can be reprocessed per cycle with further laboratory glassware. - Safety through monitoring - wash pressure and spray arm monitoringFor reliable results
Outstanding preparation results are achieved because the jet pressure and spray arms are monitored continuously and a decline in jet pressure or load blockage is detected immediately - 72% less water consumption compared to predecessor model*Save water with flawless resultscompared to standard program for G 7893
The variable-speed heating pump adjusts its speeds and thus the wash pressure in line with the relevant requirements in the program blocks – high pressure facilitates the removal of stubborn soiling, while low pressure guarantees the complete soaking of all the wash items. As a result, the consumption of water and energy remains particularly low with optimum wash pressure at all times. Outstanding results while ensuring sustainable use of resources. - Efficient hot air drying - DryPlusEfficient drying
The hot air drying feature DryPlus is the perfect solution for intricate and narrow-lumened laboratory glassware and equipment. The H13 HEPA filter ensures optimum particle separation from the air. The filter can be easily accessed through the front of the machine. - Total security - link to process documentation possibleEnd-to-end documentation
The optional addition of a module for process documentation is provided via a communication slot. The Ethernet module is used for documentation via software. The RS 232 module must be used for documentation within a USB solution or via a printer.
Article color
Product benefits
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Clear text display
Text display
Everything at a glance: The display shows everything as clear text in the country-specific language.
AutoClose*European patent EP 1 733 675 B1
Automatically closing door
A light touch is all it takes: With AutoClose the door closes on its own.
Large selection of components
Reprocess flexibly
Flexible and comprehensive components for optimum cleaning performance and a variety of reprocessing options.
Can be built under a worktop
For a consistent look
The machine can be easily integrated under a worktop.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Product details
PG 8593 [WW AD 208V]
EAN 4002515642375 / Article number 62859301USA / Material number 10250030
EAN 4002515642375 / Article number 62859301USA / Material number 10250030
| Model | Freestanding appliance, can be built-under, slim |
|---|---|
| Outer casing | Stainless Steel |
| Can be built-under | |
| AutoClose – Automatic door lock | AutoClose* A light touch is all it takes: With AutoClose the door closes on its own.European patent EP 1 733 675 B1 |
| Buzzer, acoustic signal at end of program | |
| Easy-to-service construction |
| Laboratory flasks per cycle [number] | 128 |
|---|---|
| Pipettes per cycle [number] | 98 |
| Circulation pump, Qmax in gal/min (l/min) | 132.1 (500) |
|---|---|
| Maximum final rinse temperature in °F (in °C) | 199 (93) |
| Usable wash cabinet volume in l | 5.12 (145) |
| Tested operating hours Note Our machines undergo intensive testing under laboratory conditions. The actual operating hours may vary depending on actual usage behavior, maintenance, and care of the machine. | 15000 |
| Control system | TouchControl |
|---|---|
| Program selection | Touch on Metal Touch on Metal Greater user convenience and easy surface cleaning. |
| Short cut buttons | |
| Max. delay start in h | 24 |
| Programmability | programmable |
| Programs [number] | 15 |
| Free program slots [number] | 2 |
| A0 value controls | |
| Automatic program restart | Program failure protection Time-saving and safe: The program failure protection facilitates the continuation of the cleaning and disinfection process after a short interruption, such as a power cut. If the success of the reprocessing process should be at risk, the appliance issues a corresponding warning message. |
| Time-left display | |
| Program-cycle display | |
| Choice of display languages |
| Electrical connection | 3 AC 208V 60HZ |
|---|---|
| Electric heater rating in kW | 5.4 |
| Total rated load in kW | 6.2 |
| Fuse rating in A | 20 |
| Length of power cord in ft (m) Note The length refers to the supply lead on the outside of the appliance. | 5 (1.8) |
| Electrical connection | 2 AC 208V 60HZ |
|---|---|
| Electric heater rating in kW | 5.4 |
| Total rated load in kW | 6.2 |
| Fuse rating in A | 30 |
| Cold water [number] | 1 |
|---|---|
| Cold water for steam condenser [number] | 1 |
| Hot water [number] Efficient hot water connection Connection to the warm water supply saves a lot of time and energy. | 1 |
| DI water [number] DI water supply Thanks to the connection for fully demineralized (DI water), these washer-disinfectors and thermal disinfectors facilitate optimum reprocessing results. Rinsing with fully demineralized water also protects valuable wash items from deposits and corrosion. | 1 |
| Required flow pressure in kPa Note on highly purified water variants This value applies to cold, hot, and fully demineralized water; however, it does not apply to the DI water intake for the highly purified water variants as a feed pump is used in this case. | 200-1000 |
| Maximum delivery head for drain pump in inches (cm) | 39 3/8 (100) |
| Integrated water softener | |
| Maximum water hardness (cold water/hot water) in gpg (mmol/l) | 62.595 (10.7) |
| Drain pump [DN] | 0.866 (22) |
| Water protection system Waterproof System (WPS) Protection against flooding: In the event of problems, the system stops water intake automatically. | Waterproof system |
| Integrated drying unit | |
|---|---|
| Fan in kW | 0.3 |
| Heating element in kW | 2.2 |
| Total rated load in kW | 2.5 |
| Air throughput in m³/h | 60 |
| Temperature settings in 1° steps | 50-115 |
| Time settings in 1-minute steps | 0-120 |
| HEPA-filter class | H13 HEPA-filter Protection against contamination thanks to particle-free drying air. |
| HEPA-filter filtration efficiency (in accordance with DIN EN 1822) in % | 99.95 |
| HEPA-filter service life in h | 200 |
| External dimensions, net height in inches | 32 7/8 (835) |
|---|---|
| External dimensions, net width in inches | 23 5/8 (600) |
| External dimensions, net depth in inches | 23 5/8 (600) |
| External dimensions, gross height in inches Note Including packaging | 37 1/16 (940) |
| External dimensions, gross width in inches Note Including packaging | 26 5/8 (675) |
| External dimensions, gross depth in inches (mm) Note Including packaging | 29 3/8 (745) |
| Wash cabinet, usable height in inches | 20 1/2 (520) |
| Wash cabinet, usable width in inches | 20 7/8 (530) |
| Wash cabinet, depth of upper basket in inches | 18 11/16 (474) |
| Wash cabinet, depth of lower basket in inches | 20 1/2 (520) |
| Net weight in lbs | 171.961 (78) |
| Gross weight in lbs Note Including packaging | 187.393 (85) |
| Emission sound pressure level in the workplace Emissions - sound pressure at workplace The emission sound pressure level provides a value for the noise emission created by the machine. Miele Professional machines have an extremely low sound pressure level. | <lt/>70 dB(A) re 20 µPa |
|---|---|
| Heat dissipation into the room in btu/h (MJ/h) Heat output into the room During operation ,warm air is vented into the room. The released amount of heat/time depends on the set temperatures and the intensity of use. The stated maximum value can be used to control the temperature of the area or to calculate an increase in room temperature. | 1.4 |
| Special 93°C–10' (200°F) | |
|---|---|
| Standard | |
| Universal | |
| Intensive | |
| Inorganica | |
| Organica | |
| Injector Plus | |
| Pipettes | |
| Plastics | |
| Mini | |
| Oil program |
| RS 232 serial interface (optional) | |
|---|---|
| Ethernet interface (optional) | |
| External dispenser modules |
| IP safety class according to EN 60529: IP 21 | |
|---|---|
| EN 61010-1 | |
| EN 61010-2-040 | |
| c CSA us |
Additional components and consumables
Find additional components and consumables to go with this product
Additional components for laboratory technology
Find here the components that can be bought additionally for this product.
Additional consumables for laboratory technology
Find here the consumables that can be bought additionally for this product.