Product selection accessories laboratory technology

for the optimum loading of laboratory glassware.

for optimal loading centrifuge tubes, phials or test tubes, for example.

for the optimum loading of wide neck flasks, measuring cylinders, etc.

for the optimum loading of wide neck flasks, measuring cylinders, etc.

for the optimum loading of wide neck flasks, measuring cylinders, etc.

for the optimum loading of beakers up to 250 ml.

for the optimum loading of beakers from 250 to 600 ml.

for the optimum loading of beakers from 600 to 1,000 ml.

for optimum loading of 210 slides.

for the optimum loading of up to 18 beakers.

for optimum loading of 80 test tubes, 16 x 105 mm.

for the optimum loading of narrow-neck glassware.

for the optimum loading of butyrometers.

for the optimum loading of pipettes/MIS instruments in injector units.

for the optimum loading of narrow-neck glassware.

for the optimum loading of narrow-neck glassware.

for the optimum cleaning of the wash items. Size 4 x 160 mm.

for the optimum cleaning of the wash items.

Height-adjustable for optimum positioning of laboratory glassware on the nozzle.

Height-adjustable for optimum positioning of laboratory glassware on the nozzle.

for the optimum loading of narrow-neck glassware.

for the sealing of fittings to load carriers.

for the optimum loading of narrow-neck glassware.

for the optimum loading of narrow-neck glassware.

for the optimum loading of up to 116 pipettes.

for the optimum loading of up to 96 pipettes.

for the optimum loading of narrow-neck glassware.

with plastic supports, Ø 0 1/8 (3), length 90 mm.

with plastic supports, Ø 0 1/8 (3), length 110 mm.

with plastic supports, Ø 0 1/4 (4), length 140 mm.

with plastic supports, Ø 0 1/4 (4), length 160 mm.

with plastic supports, Ø 0 1/4 (4), length 180 mm.

with plastic supports, Ø 0 1/4 (6), length 200 mm.

with plastic supports, Ø 0 1/4 (6), length 220 mm.

with plastic supports, Ø 0 1/4 (6), length 240 mm.

for the optimum loading of petri dishes.

for optimum loading of 56 half petri dishes.

for optimum loading of 56 half petri dishes.

for manual removal of de-mineralized water.

For the regeneration of full demineralization cartridges

ideal for transferring single use resin.

for optimum loading of up to 44 watch glasses.

for optimum loading of up to 105 watch glasses.

For fixing delicate wash items.

to cover for wash items in inserts.

for holding different utensils.

for the optimum loading of narrow-neck glassware.

For fixing delicate wash items.

for the optimum loading of narrow-neck glassware on 2 levels.

for modules on 2 levels.

to increase capacity by two further mesh trays.

including drip tray and openings for connecting services to G 7825/26.

for automatic mobile unit recognition.

for the optimum loading of short, thin objects e.g. circuit boards

for the optimum loading of euro printed circuit boards, supports 70 mm high.

for the optimum loading of euro printed circuit boards, supports 130 mm high.

for optimum loading of centrifuge tubes, phials and test tubes, for example.

for the optimum loading of narrow-neck glassware 100 - 500 ml.

for the optimum loading of narrow-neck glassware 500 - 1,000 ml.

for the optimum loading of up to 23 pipettes.

for the optimum loading of narrow neck- glassware 100 - 1,000 ml.

including drip tray without openings for connecting services to G 7825.

including drip tray without openings for connecting services to PG 8527.

for use in the mobile injector unit, Ø 2.5 x 90 mm.

for the optimum loading of narrow neck- glassware 25 - 100 ml.

For fixing delicate wash items.

for holding different utensils.

for the optimum loading of large volume laboratory glassware.

for the optimum loading of up to 12 large volume laboratory glassware.

for the optimum loading of beakers 250 - 600 ml.

for the optimum loading of beakers up to 250 ml.

for the optimum loading of different wash items.

for the optimum loading of wide-neck Erlenmeyer flasks.

for the optimum loading of modules on 1 - 4 levels.

For interruption-free connection to the printer.

for the optimum loading of up to 104 pipettes.

for loading & unloading washer-&disinfectors.

for the optimum loading of narrow-neck glassware.

for the optimum loading of centrifuge tubes, phials and test tubes.

for the optimum loading of different inserts and mesh trays.

height adjustable, for loading & unloading washer-&disinfectors.

for the gentle holding of 5 microtiter plates.

for cladding the steam condenser incl. service door, for G 7825/26.

For the gentle cleaning of delicate items by interrupting the spray jet.

For the gentle cleaning of delicate items by interrupting the spray jet.

for the optimum loading of narrow-neck glassware on 3 levels.

for the optimum loading of up to 38 pipettes.

for optimum loading of up to 38 pipettes, connection for hot air drying.

for cladding the steam condenser incl. service door, for PG 8527/28.

For the top cover on the cladding for models PG 8527 and PG 8528.

including drip tray without openings for connecting services to PG 8527/28.

for process documentation, integrated

For the optimum loading of test tubes up to 12 x 75 mm.

for the optimum loading of test tubes up to 12 x 105 mm.

for the optimum loading of test tubes up to 12 x 165 mm.

for the optimum loading of test tubes up to 12 x 200 mm.

for the optimum loading of different inserts.

for the optimum loading of different inserts.

for loading & unloading washer-&disinfectors.

for the optimum loading of up to 116 pipettes.

for the optimum loading of narrow-neck glassware 100 - 500 ml.

for the optimum loading of narrow-neck glassware 500 - 1,000 ml.

for inserts.

for cleaning 88 centrifuge tubes, phials or test tubes, for example.

for the optimum loading of mesh trays on 4 levels.

for the optimum loading of instruments on 3 levels.

for the optimum cleaning of instruments on 2 levels.

for the optimum cleaning of instruments on 4 levels.

for the optimum cleaning of instruments on 5 levels.

for the optimum cleaning of instruments on 3 levels.

for the optimum cleaning of instruments on 2 levels.

3 m, for the extension of connection cable type 1 and 2.

5 m, for the extension of connection cable type 1 and 2.

10 m, for the extension of connection cable type 1 and 2.

for connection to the network, length 3 m (type 6).

for connection to the network, length 5 m (type 7).

for printing process reports.

for the optimum cleaning of instruments on 6 levels.

For optimum water preparation.

For the manual filling of single use resins.

For the optimum loading of injector modules or inserts.

Height adjustable, for the optimum loading of inserts.

Height adjustable, for the optimum loading of inserts.

For the optimum loading of inserts.

For the optimum loading of injector modules or inserts.

For holding standard DIN mesh trays as well as various inserts.

for the optimum loading of 38 pipettes.

for the optimum loading of 4 DIN mesh trays.

for the optimum loading of laboratory glassware.

for the optimum loading of laboratory glassware.

for the optimum loading of laboratory glassware.

for the optimum loading of butyrometers.

for the optimum loading of up to 98 pipettes.

for the optimum loading of up to 98 vials.

for the optimum loading of large volume laboratory glassware.

for the optimum cleaning of the dispenser compartment.

for connection to the Segosoft Miele Edition or other software.

for two full or partial demineralization cartridges.

for process chemicals and dispenser modules

to raise the machine, 23..6 inches deep and wide

to raise the machine incl. side unit, 23.6 inches deep, 35.4 inches wide.

to raise the machine, 27.6 inches deep, 35.4 inches wide.

With level indicator for the automatic dispensing of liquid cleaning agents.

With level indicator for the automatic dispensing of liquid cleaning agents.

for connection to the Segosoft USB solution/report printer PRT 100.

For machines 36 in. (900 mm) wide without a steam condenser or drying unit. 

For machines 45 in. (1150 mm) wide without a steam condenser or drying unit.

For measuring the conductivity level and the display for changing the cartridge.

For effective moisture removal from and cooling of exhaust air. 

For converting machines with drain valves to drain pumps.

For machines 36 in. (900 mm) wide, incl. drip tray no openings for floor drain. 

For machines 45 in (1150 mm) wide, incl. drip tray no openings for floor drain.

With 1 level for cleaning laboratory glassware and utensils.

With 4 levels for cleaning laboratory glassware and utensils.

No levels, for cleaning laboratory glassware/utensils.

For the addition of another level in mobile unit A 501.

For the expansion of the A 500 mobile unit to 2 levels.

For use of e.g., lab glassware inserts on the top level of A 503 mobile units

With 3 levels for cleaning laboratory glassware and utensils.

For optimum reprocessing of vials and test tubes, etc.

For the optimum reprocessing of large-volume laboratory glassware.

For the optimum reprocessing of volumetric and measuring pipettes.

For the optimum reprocessing of laboratory glassware, 10 injector positions.

For the optimum reprocessing of laboratory glassware, 20 injector positions.

For the optimum reprocessing of laboratory glassware, 36 injector positions.

With 4 levels for cleaning laboratory glassware and utensils.

For the optimum loading of measuring cylinders.

With support, for cleaning laboratory flasks and round flasks.

With support, for cleaning Erlenmeyer flasks.

With support, for cleaning measuring flasks.

For the optimum loading of large-volume laboratory glassware. 

For setting basket heights and assembling/dismantling injector nozzles.

With plastic supports, nozzle diameter 6, length 130 mm, 1 item. 

With plastic supports, nozzle diameter 6, length 210 mm, 1 item

With plastic supports, nozzle diameter 4, length 90 mm, 1 item 

With plastic supports, nozzle diameter 4, length 185 mm, 1 item

With plastic supports, nozzle diameter 2.5, length 80 mm, 1 item.

With plastic supports, nozzle diameter 2.5, length 125 mm, 1 item.

For optimum loading of laboratory glassware – can be equipped with 8 nozzles.

For optimum loading of laboratory glassware – can be equipped with 18 nozzles. 

For optimum loading of laboratory glassware – can be equipped with 32 nozzles.

For injector modules A 300/2 and A 300/3

For injector modules A 301/4 and A 301/5

For injector modules A 302/2 and A 302/3

With 39 connections for injector nozzles.

With plastic supports, Ø 4 mm, length 175 mm.

for optimum loading of laboratory glassware on the top levels.

for optimum loading of laboratory glassware on the bottom level.

for optimum loading of large-volume lab glassware, 1.3 - 2.6 gal. (5 - 10 l.

for optimum loading of large-volume laboratory glassware up to 5.2 gal. (20 l. )

for optimum loading of large-volume lab glassware up to 13.2 gal. (50 l. )

for optimum loading of up to 56 pipettes.

for optimum loading of up to 121 pipettes.

for optimum loading of 2 pipette cassettes.

for optimum loading of 3 pipette cassettes.

for optimum loading of 2 pipette cassettes.

with 156 empty injector spaces for nozzles Ø 3/32" (2.5 mm. )

with 110 empty injector spaces for nozzles Ø 3/32" (2.5 mm.)

with 84 empty injector spaces for nozzles Ø 3/32" (2.5 mm.)

with 42 empty injector spaces.

equipped with 42 APLW 051 injector nozzles

equipped with 32 APLW 051 injector nozzles and 10 APLW 055 injector nozzles

with 20 empty injector spaces.

equipped with APLW 055 injector nozzles

with 16 empty injector spaces.

with 27 empty injector spaces.

with 121 empty injector spaces.

with 121 + 24 empty injector spaces.

equipped with 121 APLW 048 injector nozzles and 24 APLW 051 injector nozzles.

with 121 empty injector spaces for nozzles Ø 3/32" (2.5 mm.)

equipped with 121 APLW 047 injector nozzles.

with 121 empty injector spaces for nozzles Ø 3/32" (2.5 mm.)

equipped with 121 APLW 047 injector nozzles.

with 110 empty injector spaces for nozzles Ø 3/32" (2.5 mm.)

with 70 empty injector spaces for nozzles Ø 3/32" (2.5 mm.)

with 56 empty injector spaces for nozzles Ø 3/32" (2.5 mm.)

with 42 empty injector spaces for nozzles.

equipped with 42 APLW 052 injector nozzles.

equipped with 32 APLW 051 injector nozzles and 10 APLW 055 injector nozzles.

equipped with 30 APLW 066 injector nozzles and 12 APLW 067 injector nozzles.

with 24 empty injector spaces for nozzles.

equipped with 12 APLW 056 injector nozzles and 12 APLW 052 injector nozzles.

with 20 empty injector spaces for nozzles.

equipped with 20 APLW 056 injector nozzles.

with 16 empty injector spaces for nozzles.

with 27 empty injector spaces for nozzles.

with 27 empty injector spaces for nozzles.

with 12 empty injector spaces for nozzles.

equipped with 6 APLW 067 injector nozzles and 6 APLW 066 injector nozzles.

with 9 empty injector spaces for nozzles.

with 121 + 24 empty injector spaces for nozzles.

equipped with 121 APLW 048 injector nozzles and 24 APLW 056 injector nozzles.

to create an even surface.

height 9 27/32" (250 mm), for fixing delicate wash items.

height 6 57/64" (175 mm), for fixing delicate wash items.

height 1 49/64" (45 mm), for fixing delicate wash items.

height-adjustable, for fixing delicate wash items

for optimum loading of wide-neck Erlenmeyer flasks and measuring cylinders.

for optimum loading of half petri dishes.

for optimum loading of test tubes, height 3 15/16" (100 mm.)

for optimum loading of test tubes, height 5 1/8" (130 mm.)

for optimum loading of test tubes, height 7 7/8" (200 mm.)

for APLW 040-042 inserts

for dividing the base area in APLW 042.

with plastic support, conical, Ø 3/32" (2.5 mm.), length 3 5/32" (80 mm.)

with plastic support, conical and spring holder, Ø 2.5, length 80 mm.

with plastic support, conical, Ø 3/32" (2.5 mm), length 2" (50 mm.)

with plastic support, star-shaped, Ø 3/32" (2.5 mm), length 3 5/32" (80 mm.)

with plastic support, star-shaped, Ø 3/32" (2.5 mm), length 6 7/64" (155 mm.)

with plastic support, star-shaped, Ø 5/32" (4 mm), length 2 61/64" (75 mm.)

with plastic support, star-shaped with locking retainer, Ø 4, length 110 mm.

with plastic support, star-shaped with locking retainer, Ø 4, length 175 mm.

with plastic support, star-shaped, Ø 15/64" (6 mm), length 4 17/32" (115 mm.)

with plastic support, star-shaped with locking retainer, Ø 6, length 135 mm.

with plastic support, star-shaped with locking retainer, Ø 6, length 175 mm.

with plastic support, star-shaped with locking retainer, Ø 6, length 225 mm.

with plastic support, star-shaped with locking retainer, Ø 6, length 275 mm.

with plastic support, bottle support, Ø 15/64" (6 mm), length 5 5/16" (135 mm).

with plastic support & bottle support with locking retainer, Ø 6, length 225 mm.

with plastic support & bottle support with locking retainer, Ø 6, length 275 mm.

with plastic support and bottle neck holder, star-shaped, Ø 6, length 115 mm.

with plastic support and bottle neck holder, star-shaped, Ø 6, length 135 mm.

with plastic support and bottle neck holder, star-shaped, Ø 6, length 175 mm.

with plastic support and bottle neck holder, star-shaped, Ø 6, length 225 mm.

with plastic support and bottle neck holder, star-shaped, Ø 6, length 275 mm.

with holder, Ø 15/64" (6 mm), length 6 57/64" (175 mm.)

with holder, Ø 15/64" (6 mm), length 8 55/64" (225 mm.)

with holder, Ø 15/64" (6 mm), length 10 53/64" (275 mm.)

with stainless steel support, Ø 5/16" (8 mm), length 10 3/64" (255 mm.)

with stainless steel support, Ø 5/16" (8 mm), length 12 19/32" (320 mm.)

w/ holder for meas. cylinders up to Ø 105 mm & inj. nozzles Ø 8, length 320 mm.

for sealing fittings to load carriers.

star-shaped Ø 1 17/64" (32 mm), for injector nozzles Ø 3/32" (2.5 mm.)

conical Ø 19/32" (15 mm), for injector nozzles Ø 3/32" (2.5 mm.)

Ø 5/32" (4 mm), for injector nozzles Ø 3/32" (2.5 mm.)

star-shaped Ø 2 1/8" (54 mm), for injector nozzles Ø 5/32" (4 mm.)

Ø 13/64" (5 mm), for injector nozzles Ø 5/32" (4 mm.)

Ø 25/64" (10 mm), for injector nozzles Ø 15/64" (6 mm.

star-shaped Ø 2 61/64" (75 mm), for injector nozzles Ø 15/64" (6 mm.)

for injector nozzle, height 5 33/64" (140 mm.)

for injector nozzle, height 7 21/64" (186 mm.)

for injector nozzle, height 7 7/8" (200 mm.)

for injector nozzle, height 5 1/8" (130 mm.)

Ø 1 7/64" (28 mm), for injector nozzles Ø 15/64" (6 mm).

Ø 1 19/64" (33 mm), for injector nozzles Ø 15/64" (6 mm.)

Ø 1 49/64" (45 mm), for injector nozzles Ø 15/64" (6 mm.)

made of stainless steel, star-shaped Ø 87 mm, for injector nozzles Ø 8 mm

for measuring cylinders up to Ø 105 mm and injector nozzles Ø 8.

for injector nozzles.

for pipettes with max. 35/64" (14 mm) and min. 5/32" (4 mm) diameter.

for injector nozzles Ø 3/32" (2.5 mm.)

for sealing unused openings on load carriers.

with cap for pipettes, max. Ø 7/16" (11 mm.)

With plastic supports, nozzle diameter 6, length 130 mm, 5 items.

With plastic supports, nozzle diameter 6, length 210 mm, 5 items 

With plastic supports, nozzle diameter 6, length 210 mm, 10 items 

With plastic supports, nozzle diameter 6, length 210 mm, 20 items

With plastic supports, nozzle diameter 6, length 130 mm, 10 items.

With plastic supports, nozzle diameter 6, length 130 mm, 20 items.

With plastic supports, nozzle diameter 4, length 90 mm, 5 items 

With plastic supports, nozzle diameter 4, length 90 mm, 10 items

With plastic supports, nozzle diameter 4, length 90 mm, 20 items

With plastic supports, nozzle diameter 4, length 185 mm, 5 items

With plastic supports, nozzle diameter 4, length 185 mm, 10 items

With plastic supports, nozzle diameter 4, length 185 mm, 20 items

With plastic supports, nozzle diameter 2.5, length 80 mm, 5 items.

With plastic supports, nozzle diameter 2.5, length 80 mm, 10 items. 

With plastic supports, nozzle diameter 2.5, length 80 mm, 20 items.

With plastic supports, nozzle diameter 2.5, length 125 mm, 5 items.

With plastic supports, nozzle diameter 2.5, length 125 mm, 10 items.

With plastic supports, nozzle diameter 2.5, length 125 mm, 20 items. 

For optimum loading of laboratory glassware – can be equipped with 8 nozzles. 

For optimum loading of laboratory glassware – can be equipped with 18 nozzles.

For optimum loading of laboratory glassware – can be equipped with 32 nozzles.

For the optimum loading of wide-necked laboratory glassware.

For loading and unloading washer-disinfectors and lab washers. 

For using lab carts with the G 7827/28 and PG 8527/28 machines in the PG 86xx.

For injector module A 620.

For injector module A 621.

For injector module A 622.