PLW 8617 [EL RT] - Lab washer, electric heating - single door, with recycling tank, 3' 9 1/4" wide, 12.40 (351) l usable capacity.--stainless steel exterior
  • - single door, with recycling tank, 3' 9 1/4" wide, 12.40 (351) l usable capacity.--stainless steel exterior
 

PLW 8617 [EL RT]
Lab washer, electric heating
- single door, with recycling tank, 3' 9 1/4" wide, 12.40 (351) l usable capacity.

  • Performance/cycle, e.g., 216 laboratory flasks, 588 vials, or 294 pipettes
  • Environmentally friendly thanks to recycling tank

    Recycling tank

    Environmentally friendly: efficient saving of water and energy.
  • Flexible and simple – modular load carriers & SimpleLoad system

    Flexible use of load carriers

    The flexible load carriers from Miele Professional offer an extremely wide range of loading options.
    With a low number of load carriers combined with additional modules and inserts, the load carriers can be flexibly adapted to the wash items in just a few steps, optimizing both costs and the amount of space required.

    SimpleLoad

    The SimpleLoad system makes reprocessing laboratory glassware considerably faster, simpler, and more efficient. The biggest advantage of the new system is that wash items can be positioned over nozzles both more simply and faster as it is no longer necessary to adjust the height of the holders thanks to the smart combination of nozzles and holding frames. This makes it easy to position items correctly.
  • Efficient – high pump performance with the variable-speed pump

    The core for perfect results

    2-pump technology is at the heart of Miele Lab Washers. The variable-speed pump for the basket docking system is particularly flexible. Using this pump, the wash pressure and water demand are adjusted in line with the relevant requirements – high pressure facilitates the removal of stubborn stains, while low pressure guarantees complete soaking. This ensures minimal use of resources with maximum cleaning performance.
  • Reliable results – spray arm monitoring and conductivity meter

    Spray arm monitoring

    Reliable cleaning performance thanks to the monitoring of the rotation speed of the spray arm.

    Conductivity monitoring

    Reliably clean: Residue-free final rinse for perfect results.
PLW8617 [EL RT]

Product details - PLW 8617 [EL RT]

EAN: 4002516148364 / Article no. 62861703USA / Mat. no. 11179800
Construction type and version 
Construction type
1 glazed lift door

Vertical door opening

The lifting door opens and closes via a vertical, electronically controlled sliding movement. In this way, the work area in front of the washer-disinfector remains freely accessible for transport trolleys, and loading and unloading conveyors. The optional lifting door in easy-to-clean full glass also allows forvisual monitoring of the ongoing reprocessing.
Heating type
Electricity
Front/back
Stainless Steel
Side panels
Stainless steel
Individual or row formation
Loading via load carriers
Electrical door lock
Buzzer, acoustic signal at end of programme
Service-friendly design

Easy-to-service construction

Short service times thanks to maintenance-optimized machine design.
Application 
Suitable for laboratories

Perfect for laboratories

These laboratory washers meet laboratory requirements particularly well. Thanks to their powerful wash technology and variety of programs, including flexible loading variations for the most diverse of laboratory glassware, they facilitate fast and analytically pure reprocessing.
Suitable for industrial use

Perfect for industrial applications

These washer-disinfectors meet the requirements of industry particularly well. With several wash procedures as well as special programs for all kinds of materials and impurities, they facilitate the thorough reprocessing of industrial tools, such as
electronics, circuit boards, glass, metal, and plastic components.
Capacity 
Narrow-necked glassware per cycle [number]
216
Test tubes per cycle [number]
588
Laboratory flasks per cycle [number]
216
Pipettes per cycle [number]
294
Performance data 
Circulation pump Qmax in gal/min (l/min)
0.025 (400)
Variable-speed pump

The core for perfect results

2-pump technology is at the heart of Miele Lab Washers. The variable-speed pump for the basket docking system is particularly flexible. Using this pump, the wash pressure and water demand are adjusted in line with the relevant requirements – high pressure facilitates the removal of stubborn stains, while low pressure guarantees complete soaking. This ensures minimal use of resources with maximum cleaning performance.
Additional circulation pump for load carriers – direct coupling, Qmax in gal/min (l/min)
600
Wash cabinet usable capacity in l
12.40 (351)
Tested operating hours

Note

Our machines undergo intensive testing under laboratory conditions. The actual operating hours may vary depending on user, maintenance, and handling of the machine.
15.000
Tested service life in wash cycles

Note

Our machines undergo intensive testing under laboratory conditions. The actual wash cycles may vary depending on actual usage behavior, maintenance, and care of the machine.
20.000
Controls 
Program selection ,,
Full-touch colour display

Maximum user convenience

Safe and simple: the newly developed touch control enables simple and intuitive operation.
Programmability
programmable

Programmable controls

According to requirements: Programmable controls enable perfect adaptation to suit individual needs.
Programs
30
Free program positions [number]
170
Program continuation in event of power outage

Program failure protection

Time-saving and safe: The program failure protection facilitates the continuation of the cleaning and disinfection process after a short interruption, such as a power cut. If the success of the reprocessing process should be at risk, the appliance issues a corresponding warning message.
Time left display
Status indication via chamber lighting

Status indication via chamber lighting

Convenient: the status of each program phase is indicated by the changing colors of the chamber lighting.
Program sequence indicator
Selectable display languages

Adjustable display language

No misunderstandings: The user can select his/her language of choice from a number of different options. All display notifications appear in this language, so that the highest level of operating safety is ensured.
Water connection/drainage 
Cold water [number]
2
Hot water [number]

Efficient hot water connection

Connection to the warm water supply saves a lot of time and energy.
1
Fully demineralized water [quantity]

DI water supply

Thanks to the connection for fully demineralized (DI water), these washer-disinfectors and thermal disinfectors facilitate optimum reprocessing results. Rinsing with fully demineralized water also protects valuable wash items from deposits and corrosion.
2
Required flow pressure in kPa
200-1.000
Maximum water hardness (cold water/hot water) in gpg (mmol/l)
0.710
Dump valve [DN]
2 (50)
Drain pump (optional)
Compressed air connection 
Compressed air connection, technical [quantity]
1
Required air pressure, technical, in kPa
600-800
Drying unit

Info

The drying unit is available as an optional extra for
- G 7823
- G 7824
- G 7825
- G 7826
- PG 8527
- PG 8528
- PLW 8615
- PLW 8616
- PLW 8617
models.
 
Heating mode drying unit
Electricity

Drying unit

Reliable reprocessing results achieved more quickly with hot air drying.
Air throughput in m³/h
147.22 (250)
Temperature settings in 1 °C steps
60-115
Time setting in 1 minute steps
1-240
HEPA filter class
H13

HEPA-filter

Protection against contamination thanks to particle-free drying air.
Filtration efficiency HEPA filter (DIN EN 1822) in %
99,950
HEPA filter service life in h
1.000
Electric heater rating in kW
8,0
Dimensions and weight 
External dimensions, net height in inches
98 1/4 (2,495)
External dimensions, net width in inches
45 3/8 (1,150)
External dimensions, net depth in inches
39 (990)
External dimensions incl. plinth/floor tray and top casing, height in mm
98 1/4 (2,495)
External dimensions, gross height in inches

Note 

Including packaging 
81 1/2 (2,070)
External dimensions, gross width in inches

Note 

Including packaging 
47 1/4 (1,200)
External dimensions, gross depth in inches

Note 

Including packaging 
31 1/2 (800)
Wash cabinet, width in inches
25 5/8 (650)
Wash cabinet, height in inches
26 5/8 (675)
Wash cabinet, depth in inches
31 1/2 (800)
In-feed height above floor in mm
33 1/2 (850)
Net weight in lb (kg)
1213 (550)
Gross weight in lbs.

Note 

Including packaging 
962 (436)
Maximum floor loading in N

Maximum floor bearing capacity

Maximum floor bearing capacity states the maximum weight (N) that can be placed on the supporting surface on which the appliance is installed. This maximum load bearing capacity is the result of adding up the weight of the machine, the load and the water in it, as well as the dynamic forces that occur during operation.
8000
Emissions data 
Heat output on the clean side into the room in Mj/h

Heat output into the room

During operation ,warm air is vented into the room. The released amount of heat/time depends on the set temperatures and the intensity of use. The stated maximum value can be used to control the temperature of the area or to calculate an increase in room temperature.
2,05
Programs 
Thermal disinfection

Individual program design

The cleaning programs are customized by Miele to special customer requirements. These customer-specific cleaning programs are transferred to the control unit when the machine is being set up.
Laboratory glassware*Not valid for USA.

Individual program design

The cleaning programs are customized by Miele to special customer requirements. These customer-specific cleaning programs are transferred to the control unit when the machine is being set up.
Plastics*Not valid for USA.

Individual program design

The cleaning programs are customized by Miele to special customer requirements. These customer-specific cleaning programs are transferred to the control unit when the machine is being set up.
Oil soiling*Not valid for USA.

Individual program design

The cleaning programs are customized by Miele to special customer requirements. These customer-specific cleaning programs are transferred to the control unit when the machine is being set up.
Industrial parts cleaning*Not valid for USA.

Individual program design

The cleaning programs are customized by Miele to special customer requirements. These customer-specific cleaning programs are transferred to the control unit when the machine is being set up.
Features 
2 integrated diaphragm dispenser pumps for liquid media

Integrated dispenser pump

Integrated dispenser pumps facilitate the quick and precise dosing of liquid detergents.
Additional integrated dispenser pumps
4
Recycling tank

Recycling tank

Environmentally friendly: efficient saving of water and energy.
Steam condenser (optional)

Steam condenser

Effective moisture removal from exhaust air.
Conductivity monitoring

Conductivity monitoring

Reliably clean: Residue-free final rinse for perfect results.
Volumetric dispensing control
Spray arm monitoring

Spray arm monitoring

Reliable cleaning performance thanks to the monitoring of the rotation speed of the spray arm.
Interface for cycle documentation

Process documentation

Safety through the clear documentation of all the reprocessing steps.
Multi-component filter system
Micro-fine filter

Microfine filter

Reliable cleaning: The large surface fine filter with a mesh of 0.2 mm reliably removes even the smallest particles from the wash water. For reliable reprocessing results and gentle care of the hydraulic components in the wash-water circuit.
Load carriers – direct connection

Load carrier direct attachment

The direct connection guarantees the precise feed-in of water and drying air (in machines with integrated hot air drying) and the economical use of resources.
Integrated hot-air drying (optional)

Integrated hot-air drying

All reprocessing items are dried efficiently using hot air filtered with a HEPA filter.
Integrated printer for process documentation (optional)

Integrated printer

For paper-supported documentation, the integrated printer produces a comprehensive report on the process.
Heater elements outside wash cabinet

Heater elements outside the wash cabinet

A plus for hygiene: The heating elements are installed outside the wash cabinet.
SimpleLoad

SimpleLoad

The SimpleLoad system makes reprocessing laboratory glassware considerably faster, simpler, and more efficient. The biggest advantage of the new system is that wash items can be positioned over nozzles both more simply and faster as it is no longer necessary to adjust the height of the holders thanks to the smart combination of nozzles and holding frames. This makes it easy to position items correctly.
Setting options for chemical agents (4 x 10 l)

Setting options for detergent canisters

Neat and tidy: The storage unit for liquid detergents.
Wash cabinet made from high-quality stainless steel (1.4404/316L)

Cabinet sheet-steel grade 316L 

The wash cabinet is made of high-quality stainless steel 1.4404 (AISI 316L).
Modular basket design

Modular load carriers

Depending on requirements or the application, load carriers can be easily adapted to the wash items.
Base, on wheels (optional)

Mobile base

To ensure that the machine is easy to service, it can be mounted on a base with castors.
Drain water cooling (optional)

Drain water cooling 

Drain water cooling can be integrated in the appliance to cool the drain water and protect the pipe network. Diluting the water with cold water enables the temperature of the drain water to be reduced to a preset value.
Multicolored chamber lighting

Status indication via chamber lighting

Convenient: the status of each program phase is indicated by the changing colors of the chamber lighting.
Connection options 
Ethernet interface

Ethernet interface

The Ethernet interface enables cable-supported communication in the local network.
External dispenser modules
USB interface

USB interface

Easy access to Technical Service: Firmware updates can be performed via USB stick in order to save time.
Central dispensing

Central dispensing

For users with a high throughput the machines can be simply connected to a central dispensing system.
Peak load cut-out/energy management
Norms, test certificates and symbols 
CE
VDE (electrical safety)
EN 61010-2-040
Machinery Directive 2006/42/EC
Illustration(s) as an example, for information
*SRP - all prices include VAT
**all prices include VAT, plus shipping costs