PLW 6111 [DP BO SC CL H14 PR UL] - Laboratory washer with 3 wash levels in SlimLine design with steam condenser and chamber lighting.--Stainless steel
  • with steam condenser and chamber lighting.--Stainless steel
  • with steam condenser and chamber lighting.--Stainless steel
 

PLW 6111 [DP BO SC CL H14 PR UL]
Laboratory washer with 3 wash levels in SlimLine design
with steam condenser and chamber lighting.

  • Performance/cycle 126 narrow-neck glasses or 121 pipettes – 7.42 (210) l capacity

     Additional loading options

    Alternatively, 468 test tubes or 84 laboratory flasks can be reprocessed per cycle.
  • Ergonomic loading and unloading – telescopic runners
  • Flexible – 4 different level positions

    SmartLoad

    Wash and dry with hot air on three separate wash levels, can be used flexibly in four positions.
  • Have everything in view thanks to the full-glass door

    Full-glass door

    In combination with the chamber lighting, the glass door allows a visual check of the current status.
  • High capacity – reprocessing of containers up to 13 gallons

    Large wash chamber

    The spacious chamber provides room for large containers (up to 13 gallons and 24 4/5" in height).
PLW6111 [DP BO SC CL H14 PR UL]

Product details - PLW 6111 [DP BO SC CL H14 PR UL]

EAN: 4002516041566 / Article no. 62611177US / Mat. no. 10959290
Construction type and version 
Construction type
1 glazed hinged door.

Full-glass door

In combination with the chamber lighting, the glass door allows a visual check of the current status.
Heating type
Electricity
Front/back
Stainless Steel
Side panels
Stainless steel
SlimLine design

SlimLine design

The slim design, just 23 3/5" wide, fits in the smallest of spaces while ensuring a high capacity.
Number of wash levels
3
Loading and unloading with telescopic runners

Telescopic runners

The telescopic runners in the wash cabinet make it even easier to load and unload items.
Electrical door lock
Buzzer, acoustic signal at end of programme
Service-friendly design

Easy-to-service construction

Short service times thanks to maintenance-optimized machine design.
Application 
Suitable for laboratories

Perfect for laboratories

These laboratory washers meet laboratory requirements particularly well. Thanks to their powerful wash technology and variety of programs, including flexible loading variations for the most diverse of laboratory glassware, they facilitate fast and analytically pure reprocessing.
Capacity 
Narrow-necked glassware per cycle [number]
126
Test tubes per cycle [number]
468
Laboratory flasks per cycle [number]
84
Pipettes per cycle [number]
121
Performance data 
Circulation pump Qmax in gal/min (l/min)
0.044 (700)
Wash cabinet usable capacity in l
7.42 (210)
Controls 
Control system
MP.CON 3
Program selection ,,
Touch on Glass

Touch on Glass

The high-quality, flush-fit glass surface is particularly easy to clean. The innovative operating concept "Touch on Glass" facilitates quick access to all the programs and settings.
Programmability
Freely programmable
Programs
18
Free program positions [number]
20
Program continuation in event of power outage

Program failure protection

Time-saving and safe: The program failure protection facilitates the continuation of the cleaning and disinfection process after a short interruption, such as a power cut. If the success of the reprocessing process should be at risk, the appliance issues a corresponding warning message.
Time left display
Program sequence indicator
Selectable display languages

Adjustable display language

No misunderstandings: The user can select his/her language of choice from a number of different options. All display notifications appear in this language, so that the highest level of operating safety is ensured.
Water connection/drainage 
Cold water [number]
1
Hot water [number]

Efficient hot water connection

Connection to the warm water supply saves a lot of time and energy.
1
Fully demineralized water [quantity]

DI water supply

Thanks to the connection for fully demineralized (DI water), these washer-disinfectors and thermal disinfectors facilitate optimum reprocessing results. Rinsing with fully demineralized water also protects valuable wash items from deposits and corrosion.
1
Required flow pressure in kPa
100-800
Maximum water hardness (cold water/hot water) in gpg (mmol/l)
0.700
Drain pump [DN]
0 7/8 (22)
Drying unit

Info

The drying unit is available as an optional extra for
- G 7823
- G 7824
- G 7825
- G 7826
- PG 8527
- PG 8528
- PLW 8615
- PLW 8616
- PLW 8617
models.
 
Heating mode drying unit
Electricity

Drying unit

Reliable reprocessing results achieved more quickly with hot air drying.
Air throughput in m³/h
88.33 (150)
Temperature settings in 1 °C steps
0-160
Time setting in 1 minute steps
0-120
HEPA filter class
H14

HEPA-filter

Protection against contamination thanks to particle-free drying air.
Filtration efficiency HEPA filter (DIN EN 1822) in %
99,995
HEPA filter service life in h
1.000
Electric heater rating in kW
4,0
Dimensions and weight 
External dimensions, net height in inches
73 5/8 (1,870)
External dimensions, net width in inches
25 5/8 (650)
External dimensions, net depth in inches
27 1/8 (687)
External dimensions, gross height in inches

Note 

Including packaging 
83 1/8 (2,110)
External dimensions, gross width in inches

Note 

Including packaging 
37 1/4 (945)
External dimensions, gross depth in inches

Note 

Including packaging 
33 1/8 (840)
Wash cabinet, width in inches
21 3/8 (540)
Wash cabinet, height in inches
26 1/4 (665)
Wash cabinet, depth in inches
23 1/8 (585)
In-feed height above floor in mm
33 1/2 (850)
Net weight in lb (kg)
554 (251)
Gross weight in lbs.

Note 

Including packaging 
574 (260)
Maximum floor loading in N

Maximum floor bearing capacity

Maximum floor bearing capacity states the maximum weight (N) that can be placed on the supporting surface on which the appliance is installed. This maximum load bearing capacity is the result of adding up the weight of the machine, the load and the water in it, as well as the dynamic forces that occur during operation.
4000
Emissions data 
Sound pressure LpA in cleaning and drying according to DIN EN ISO 11201

Emissions - sound pressure at workplace

The emission sound pressure level provides a value for the noise emission created by the machine. Miele Professional machines have an extremely low sound pressure level.
<70 dB(A) re 20 µPa
Heat dissipation into the room in btu/h (MJ/h)

Heat output into the room

During operation ,warm air is vented into the room. The released amount of heat/time depends on the set temperatures and the intensity of use. The stated maximum value can be used to control the temperature of the area or to calculate an increase in room temperature.
1,26
Programs 
Thermal disinfection

Individual program design

The cleaning programs are customized by Miele to special customer requirements. These customer-specific cleaning programs are transferred to the control unit when the machine is being set up.
Laboratory glassware*Not valid for USA.

Individual program design

The cleaning programs are customized by Miele to special customer requirements. These customer-specific cleaning programs are transferred to the control unit when the machine is being set up.
Plastics*Not valid for USA.

Individual program design

The cleaning programs are customized by Miele to special customer requirements. These customer-specific cleaning programs are transferred to the control unit when the machine is being set up.
Features 
2 integrated hose dispenser pumps for liquid media

Integrated dispenser pump

Integrated dispenser pumps facilitate the quick and precise dosing of liquid detergents.
Boiler for preheating fully demineralized water

Boiler for preheating fully demineralized water

Thanks to the boiler, preheated DI water is already available in the final rinse phase, which reduces the program cycle time considerably.
Steam condenser

Steam condenser

Effective moisture removal from exhaust air.
Volumetric dispensing control
Interface for cycle documentation

Process documentation

Safety through the clear documentation of all the reprocessing steps.
Multi-component filter system
Load carriers – direct connection

Load carrier direct attachment

The direct connection guarantees the precise feed-in of water and drying air (in machines with integrated hot air drying) and the economical use of resources.
Integrated hot-air drying

Integrated hot-air drying

All reprocessing items are dried efficiently using hot air filtered with a HEPA filter.
Integrated printer for cycle documentation

Integrated printer

For paper-supported documentation, the integrated printer produces a comprehensive report on the process.
Wash cabinet made from high-quality stainless steel (1.4404/316L)

Cabinet sheet-steel grade 316L 

The wash cabinet is made of high-quality stainless steel 1.4404 (AISI 316L).
Base
Chamber lighting
Connection options 
RS 232 serial interface

RS 232 serial interface

The serial interface facilitates the exchange of data with other appliances, e.g. for process documentation.
USB interface

USB interface

Easy access to Technical Service: Firmware updates can be performed via USB stick in order to save time.
Norms, test certificates and symbols 
RoHS Directive 2011/65/EU
c CSA us
Illustration(s) as an example, for information
*SRP - all prices include VAT
**all prices include VAT, plus shipping costs