PG 8583 CD [WW AD CM OIL] - Laboratory glassware washer
 

PG 8583 CD [WW AD CM OIL]
Laboratory glassware washer
with liquid dispensing, DryPlus, conductivity monitoring & oil resistant seals.

  • Perf./cycle, e.g., 128 laboratory flasks

    Further stacking options

    Alternatively, 98 pipettes can be reprocessed per cycle with further laboratory glassware.
  • Efficient use of resources - variable speed heater pump

    The heart of perfect results

    In the individual programs the speed of the pump and thus the wash pressure is adjusted in line with the relevant requirements – high pressure facilitates the removal of stubborn soiling, whilst low pressure guarantees the complete wetting of all the wash items. As a result, the consumption of water and energy remains particularly low with optimum wash pressure at all times.
  • Safety - Wash pressure, spray arm and conductivity monitoring

    For reliable results

    Outstanding preparation results are achieved because the jet pressure and spray arms are monitored continuously and a decline in jet pressure or load blockage is detected immediately In addition, any deviations from the prescribed conductivity of the water, particularly in the final rinse, are detected.
  • Efficient hot air drying - DryPlus

    Efficient drying

    DryPlus hot air drying is the optimum solution for hollow instruments or narrow-lumened laboratory glassware. The upstream H14 HEPA filter ensures optimum particle separation from the drying air. The filter is easily accessible via a side unit.
  • Total security - link to process documentation possible

    End-to-end documentation

    The optional addition of a module for process documentation is provided via a communication slot. The Ethernet module is used for documentation via software. The RS 232 module must be used for documentation within a USB solution or via a printer.
PG8583 CD [WW AD CM OIL]

Product details - PG 8583 CD [WW AD CM OIL]

EAN: 4002515648636 / Article no. 62858373USA / Mat. no. 10262740
Construction type and version 
Construction type
Freestanding, can be built-under, wide with lid
Outer casing
Stainless steel
Can be built-under

Can be built under a worktop

The machine can be easily integrated under a worktop.
AutoClose – Automatic door lock

AutoClose*

A light touch is all it takes: With AutoClose the door closes on its own.
European patent EP 1 733 675 B1
Buzzer, acoustic signal at end of program
Service-friendly design

Easy-to-service construction

Short service times thanks to maintenance-optimized machine design.
Application 
Suitable for laboratories

Perfect for laboratories

These laboratory washers meet laboratory requirements particularly well. Thanks to their powerful wash technology and variety of programs, including flexible loading variations for the most diverse of laboratory glassware, they facilitate fast and analytically pure reprocessing.
Capacity 
Laboratory flasks per cycle [number]
128
Pipettes per cycle [number]
98
Performance data 
Circulation pump Qmax in (l/min)
0.0 (500)
Shortest program duration in min.

Drying

Some machines have a drying option. This can be set individually depending on the reprocessing situation.
29
Maximum final rinse temperature in °F (°C)
199 (93)
Wash cabinet usable capacity in cu.ft (l)
5.12 (145.00)
Tested operating hours

Note

Our machines undergo intensive testing under laboratory conditions. The actual operating hours may vary depending on user, maintenance, and handling of the machine.
15,000
Controls 
Control system
TouchControl
Program selection
Touch on metal
Short-cut buttons

Shortcut buttons

Quick and convenient access to frequently used programs.
Max. delay start in h
24
Programmability
programmable
Programs [number]
15
Free program positions [number]
2
A0 value controls

Intelligent A0-value controls

As soon as the prescribed A0 value is reached, the disinfection phase comes to an end and the program continues in the next phase. Due to this system the cycle time is reduced, in comparison to a time-controlled program..
Program continuation in event of power outage

Program failure protection

Time-saving and safe: The program failure protection facilitates the continuation of the cleaning and disinfection process after a short interruption, such as a power cut. If the success of the reprocessing process should be at risk, the appliance issues a corresponding warning message.
Time left display
Program sequence indicator
Selectable display languages

Adjustable display language

No misunderstandings: The user can select his/her language of choice from a number of different options. All display notifications appear in this language, so that the highest level of operating safety is ensured.
Standard electrical connection 
Electrical connection
3 AC 208V 60HZ
Heater rating in kW
5.4
Total connected load in kW
6.2
Fuse rating in A
20
Length of power cord in ft (m)

Note

The length refers to the supply lead on the outside of the appliance.
5 (1.80)
Possible voltage variant 1

Note

If the appliance can be converted to a different voltage option, additional possible values for electrical connection can be found here. The conversion can be done by Miele Service.
 
Electrical connection
2 AC 208V 60HZ
Total connected load in kW
6.20
Fuse rating in A
30
Water connection/drainage 
Cold water [number]
1
Cold water for steam condenser [number]
1
Hot water [number]

Efficient hot water connection

Connection to the warm water supply saves a lot of time and energy.
1
Fully demineralized water [quantity]

DI water supply

Thanks to the connection for fully demineralized (DI water), these washer-disinfectors and thermal disinfectors facilitate optimum reprocessing results. Rinsing with fully demineralized water also protects valuable wash items from deposits and corrosion.
1
Required flow pressure in kPa

Note on highly purified water variants

This value applies to cold, hot, and fully demineralized water; however, it does not apply to the DI water intake for the highly purified water variants as a feed pump is used in this case.
200-1.000
Drain pump head height from floor level max. in inches (cm)
39 3/8 (100)
Integrated water softener

Integrated water softener

The integrated water softener ensures optimum cleaning effectiveness.
Maximum water hardness (cold water/hot water) in gpg (mmol/l)
10,700
Drain pump [DN]
0 7/8 (22)
Water protection system
Waterproof system
Drying unit 
Integrated drying unit

Drying unit

Reliable reprocessing results achieved more quickly with hot air drying.
Fan in kW
0.3
Heater element in kW
2.2
Total connected load in kW
2.5
Air throughput in cu ft/h (m³/h)
60
HEPA filter class
H14
Filtration efficiency HEPA filter (in accordance with DIN EN 1822) in %
99,995
HEPA filter service life in h
500
Dimensions and weight 
External dimensions, net height in inches
32 7/8 (835)
External dimensions, net width in inches
35 1/2 (900)
External dimensions, net depth in inches
27 5/8 (700)
External dimensions, gross height in inches

Note 

Including packaging 
43 1/8 (1,095)
External dimensions, gross width in inches

Note 

Including packaging 
47 1/4 (1,200)
External dimensions, gross depth in inches

Note 

Including packaging 
31 1/2 (800)
Wash cabinet, usable height in inches (mm)
20 1/2 (520)
Wash cabinet, depth of lower basket in inches (mm)
20 1/2 (520)
Wash cabinet, usable width in inches (mm)
20 7/8 (530)
Wash cabinet, depth of upper basket in inches (mm)
18 3/4 (474)
Net weight in lb (kg)
217 (98)
Gross weight in lbs.

Note 

Including packaging 
294 (133)
Emissions data 
Emissions – sound pressure at workplace

Emissions - sound pressure at workplace

The emission sound pressure level provides a value for the noise emission created by the machine. Miele Professional machines have an extremely low sound pressure level.
<70 dB(A) re 20 µPa
Programs  
Special 93 °C–10'
Standard
Universal
Intensive
Inorganic

Innovative cleaning program

Optimum cleaning results and value retention thanks to innovative cleaning programs for over 50 years.
Injector Plus
Organic

Innovative cleaning program

Optimum cleaning results and value retention thanks to innovative cleaning programs for over 50 years.
Pipettes
Plastics
Mini
Oil program
Features 
1 dispenser pump for liquid cleaning agent

Integrated dispenser pump

Integrated dispenser pumps facilitate the quick and precise dosing of liquid detergents.
1 dispenser pump for neutralizer

Integrated dispenser pump

Integrated dispenser pumps facilitate the quick and precise dosing of liquid detergents.
Additional integrated dispenser pumps (optional)

Additional integratable dispenser pumps

For applications that require additional detergents, additional dispenser pumps can be integrated into the machine.
Volumetric dispensing control
Steam condenser
Spray pressure monitoring

Spray arm pressure monitoring

The wash pressure is monitored for perfect cleaning results.
Spray arm monitoring

Spray arm monitoring

Reliable cleaning performance thanks to the monitoring of the rotation speed of the spray arm.
Conductivity monitoring

Conductivity monitoring

Reliably clean: Residue-free final rinse for perfect results.
Interface for cycle documentation (optional)

Process documentation

Safety through the clear documentation of all the reprocessing steps.
Multi-component filter system
Variable-speed heater pump*European patent EP 1 047 334 B2/*European patent EP 1 247 993 B1

The heart of perfect results

In the individual programs the speed of the pump and thus the wash pressure is adjusted in line with the relevant requirements – high pressure facilitates the removal of stubborn soiling, whilst low pressure guarantees the complete wetting of all the wash items. As a result, the consumption of water and energy remains particularly low with optimum wash pressure at all times.
Load carriers – direct connection

Load carrier direct attachment

The direct connection guarantees the precise feed-in of water and drying air (in machines with integrated hot air drying) and the economical use of resources.
DryPlus

DryPlus

Efficient hot air drying: Ideal for drying hollow body instruments or narrow-lumened laboratory glassware.
In-door salt container

Patented* in-door salt container

Ergonomic convenience: The in-door salt container is particularly easy to fill.
European patent EP 1 457 153 B1
Customer service optical interface
Storage option for chemical agents (3 x 5 l / 2 x 10 l)

Storage options for detergent canisters

Tidy and clean: Setting options for liquid media.
Wash cabinet seamlessly welded using laser technology

Crevice-free wash cabinet

Perfect hygiene through optimized geometry and laser welding.
Heater elements outside wash cabinet

Heater elements outside the wash cabinet

A plus for hygiene: The heating elements are installed outside the wash cabinet.
Oil and grease-resistant seals
A wide range of accessories (optional)

Large selection of accessories

Comprehensive range of accessories for optimum cleaning performance and a variety of reprocessing options.
Connection options 
Serial interface RS 232 (optional)

RS 232 serial interface

The serial interface facilitates the exchange of data with other appliances, e.g. for process documentation.
Ethernet interface (optional)

Ethernet interface

The Ethernet interface enables cable-supported communication in the local network.
Norms, test certificates and symbols 
IP safety class according to EN 60529: IP 21
EN 61010-2-040
EN 61010-1
c CSA us
Illustration(s) as an example, for information
*SRP - all prices include VAT
**all prices include VAT, plus shipping costs