PG 8583 CD [WW AD CM OIL] - Laboratory glassware washer
 

PG 8583 CD [WW AD CM OIL]
Laboratory glassware washer
with liquid dispensing, DryPlus, conductivity monitoring & oil resistant seals.

  • Perf./cycle, e.g., 128 laboratory flasks

    Further stacking options

    Alternatively, 98 pipettes can be reprocessed per cycle with further laboratory glassware.
  • Efficient use of resources - variable speed heater pump

    The heart of perfect results

    In the individual programs the speed of the pump and thus the wash pressure is adjusted in line with the relevant requirements – high pressure facilitates the removal of stubborn soiling, whilst low pressure guarantees the complete wetting of all the wash items. As a result, the consumption of water and energy remains particularly low with optimum wash pressure at all times.
  • Safety - Wash pressure, spray arm and conductivity monitoring

    For reliable results

    Outstanding preparation results are achieved because the jet pressure and spray arms are monitored continuously and a decline in jet pressure or load blockage is detected immediately In addition, any deviations from the prescribed conductivity of the water, particularly in the final rinse, are detected.
  • Efficient hot air drying - DryPlus

    Efficient drying

    DryPlus hot air drying is the optimum solution for hollow instruments or narrow-lumened laboratory glassware. The upstream H14 HEPA filter ensures optimum particle separation from the drying air. The filter is easily accessible via a side unit.
  • Total security - link to process documentation possible

    End-to-end documentation

    The optional addition of a module for process documentation is provided via a communication slot. The Ethernet module is used for documentation via software. The RS 232 module must be used for documentation within a USB solution or via a printer.
PG8583 CD [WW AD CM OIL]

Optional Accessories - PG 8583 CD [WW AD CM OIL]

A 841 Injector nozzle
A 841Injector nozzle

With plastic supports, nozzle diameter 6, length 210 mm, 1 item

A 12/1 Mesh Basket
A 12/1Mesh Basket

For the gentle cleaning of delicate items by interrupting the spray jet.

A 12/2 Mesh Basket
A 12/2Mesh Basket

For the gentle cleaning of delicate wash items by interrupting the spray jet.

A 14 Lid
A 14Lid

For fixing delicate wash items.

CK DIN 51 Canister key
CK DIN 51Canister key

For easy opening of ProCare 5 l and 10 l canisters.

E 106/1 Mesh Basket
E 106/1Mesh Basket

for the optimum loading of wide neck flasks, measuring cylinders, etc.

A 840/3 Injector nozzle
A 840/3Injector nozzle

With plastic supports, nozzle diameter 6, length 130 mm, 20 items.

A 842 Injector nozzle
A 842Injector nozzle

With plastic supports, nozzle diameter 4, length 90 mm, 1 item 

A 101 Upper basket
A 101Upper basket

Height adjustable, for the optimum loading of inserts.

A 100 Upper basket
A 100Upper basket

For the optimum loading of injector modules or inserts.

A 838 Key set
A 838Key set

For setting basket heights and assembling/dismantling injector nozzles.

A 841/3 Injector nozzle
A 841/3Injector nozzle

With plastic supports, nozzle diameter 6, length 210 mm, 20 items

A 102 Upper basket
A 102Upper basket

Height adjustable, for the optimum loading of inserts.

A 841/2 Injector nozzle
A 841/2Injector nozzle

With plastic supports, nozzle diameter 6, length 210 mm, 10 items 

A 103 Upper basket
A 103Upper basket

For the optimum loading of inserts.

A 840 Injector nozzle
A 840Injector nozzle

With plastic supports, nozzle diameter 6, length 130 mm, 1 item. 

E 103/1 Mesh Basket
E 103/1Mesh Basket

For the optimum loading of test tubes up to 12 x 75 mm.

A 841/1 Injector nozzle
A 841/1Injector nozzle

With plastic supports, nozzle diameter 6, length 210 mm, 5 items 

E 104/1 Mesh Basket
E 104/1Mesh Basket

for the optimum loading of test tubes up to 12 x 105 mm.

A 150 Lower basket
A 150Lower basket

For the optimum loading of injector modules or inserts.

A 840/1 Injector nozzle
A 840/1Injector nozzle

With plastic supports, nozzle diameter 6, length 130 mm, 5 items.

XKM RS232 10 Med Communication module
XKM RS232 10 MedCommunication module

for connection to the Segosoft USB solution/report printer PRT 100.

A 14/1 Lid
A 14/1Lid

A 11/1 Mesh Basket
A 11/1Mesh Basket

For the gentle cleaning of delicate items by interrupting the spray jet.

E 105/1 Mesh Basket
E 105/1Mesh Basket

for the optimum loading of test tubes up to 12 x 165 mm.

A 802 Jets
A 802Jets

for the optimum cleaning of the dispenser compartment.

A 11/2 Mesh Basket
A 11/2Mesh Basket

For the gentle cleaning of delicate wash items by interrupting the spray jet.

CM/1 Conductivity meter
CM/1Conductivity meter

For measuring the conductivity level and the display for changing the cartridge.

E 106 Mesh Basket
E 106Mesh Basket

for the optimum loading of wide neck flasks, measuring cylinders, etc.

A 840/2 Injector nozzle
A 840/2Injector nozzle

With plastic supports, nozzle diameter 6, length 130 mm, 10 items.

A 301/2 Module
A 301/2Module

for the optimum loading of laboratory glassware.

A 300/3 Module
A 300/3Module

For optimum loading of laboratory glassware – can be equipped with 8 nozzles. 

UG 30-90/70-85 Closed base
UG 30-90/70-85Closed base

to raise the machine, 27.6 inches deep, 35.4 inches wide.

A 300/2 Module
A 300/2Module

For optimum loading of laboratory glassware – can be equipped with 8 nozzles.

A 844/1 Injector nozzle
A 844/1Injector nozzle

With plastic supports, nozzle diameter 2.5, length 80 mm, 5 items.

A 300/1 Module
A 300/1Module

for the optimum loading of laboratory glassware.

A 844 Injector nozzle
A 844Injector nozzle

With plastic supports, nozzle diameter 2.5, length 80 mm, 1 item.

A 300 Module
A 300Module

for the optimum loading of laboratory glassware.

A 843/3 Injector nozzle
A 843/3Injector nozzle

With plastic supports, nozzle diameter 4, length 185 mm, 20 items

A 843/2 Injector nozzle
A 843/2Injector nozzle

With plastic supports, nozzle diameter 4, length 185 mm, 10 items

A 845/2 Injector nozzle
A 845/2Injector nozzle

With plastic supports, nozzle diameter 2.5, length 125 mm, 10 items.

A 845/3 Injector nozzle
A 845/3Injector nozzle

With plastic supports, nozzle diameter 2.5, length 125 mm, 20 items. 

APH 591 Paper roll
APH 591Paper roll

for APH 500 PRT100 and APH 510 PRT110 report printer.

APH 590 Ink cartridge
APH 590Ink cartridge

for PRT 100 report printer.

A 846 Injector nozzle
A 846Injector nozzle

With support, for cleaning laboratory flasks and round flasks.

A 843/1 Injector nozzle
A 843/1Injector nozzle

With plastic supports, nozzle diameter 4, length 185 mm, 5 items

APH 530 Connection wire
APH 530Connection wire

For interruption-free connection to the printer.

APH 500 PRT 100 Printer
APH 500 PRT 100Printer

for printing process reports.

APH 407 Network cable
APH 407Network cable

for connection to the network, length 5 m (type 7).

APH 406 Network cable
APH 406Network cable

for connection to the network, length 3 m (type 6).

APH 305 Extension cable
APH 305Extension cable

10 m, for the extension of connection cable type 1 and 2.

APH 304 Extension cable
APH 304Extension cable

5 m, for the extension of connection cable type 1 and 2.

APH 303 Extension cable
APH 303Extension cable

3 m, for the extension of connection cable type 1 and 2.

A 312 Module
A 312Module

For reprocessing viscometers.

ProCare Lab 30 P - 5 l Acidic neutralizing agent, 5 l
ProCare Lab 30 P - 5 lAcidic neutralizing agent, 5 l

for optimum neutralization with phosphoric acid based neutralizing agent.

A 844/3 Injector nozzle
A 844/3Injector nozzle

With plastic supports, nozzle diameter 2.5, length 80 mm, 20 items.

ProCare Lab 30 P - 12 kg Acidic neutralizing agent, 12 kg
ProCare Lab 30 P - 12 kgAcidic neutralizing agent, 12 kg

For optimum neutralization with phosphoric acid based neutralizing agent.

ProCare Lab 30 C - 5 l Acidic neutralizing agent, 5 l
ProCare Lab 30 C - 5 lAcidic neutralizing agent, 5 l

for optimum neutralization with citric acid based neutralizing agent.

A 845 Injector nozzle
A 845Injector nozzle

With plastic supports, nozzle diameter 2.5, length 125 mm, 1 item.

ProCare Lab 30 C - 10 l Acidic neutralizing agent, 10 l
ProCare Lab 30 C - 10 lAcidic neutralizing agent, 10 l

for optimum neutralization with citric acid based neutralizing agent.

A 306/1 Module
A 306/1Module

For the optimum loading of large-volume laboratory glassware. 

ID 110 Injector nozzle
ID 110Injector nozzle

with plastic supports, Ø 0 1/8 (3), length 110 mm.

ID 140 Injector nozzle
ID 140Injector nozzle

with plastic supports, Ø 0 1/4 (4), length 140 mm.

ID 160 Injector nozzle
ID 160Injector nozzle

with plastic supports, Ø 0 1/4 (4), length 160 mm.

A 313 Module
A 313Module

For reprocessing large-volume laboratory glassware.

ID 180 Injector nozzle
ID 180Injector nozzle

with plastic supports, Ø 0 1/4 (4), length 180 mm.

ID 200 Injector nozzle
ID 200Injector nozzle

with plastic supports, Ø 0 1/4 (6), length 200 mm.

ID 220 Injector nozzle
ID 220Injector nozzle

with plastic supports, Ø 0 1/4 (6), length 220 mm.

A 306 Module
A 306Module

for the optimum loading of large volume laboratory glassware.

ID 240 Injector nozzle
ID 240Injector nozzle

with plastic supports, Ø 0 1/4 (6), length 240 mm.

ID 90 Injector nozzle
ID 90Injector nozzle

with plastic supports, Ø 0 1/8 (3), length 90 mm.

LP 2800 Demineralisation cartridge, empty
LP 2800Demineralisation cartridge, empty

For the manual filling of single use resins.

A 845/1 Injector nozzle
A 845/1Injector nozzle

With plastic supports, nozzle diameter 2.5, length 125 mm, 5 items.

ProCare Lab 11 MA Powder cleaning agent, mildly alkaline, 10 kg
ProCare Lab 11 MAPowder cleaning agent, mildly alkaline, 10 kg

for optimum reprocessing of laboratory utensils.

A 844/2 Injector nozzle
A 844/2Injector nozzle

With plastic supports, nozzle diameter 2.5, length 80 mm, 10 items. 

A 304 Module
A 304Module

for the optimum loading of up to 98 vials.

A 303 Module
A 303Module

for the optimum loading of up to 98 pipettes.

A 302/3 Module
A 302/3Module

For optimum loading of laboratory glassware – can be equipped with 32 nozzles.

A 302/2 Module
A 302/2Module

For optimum loading of laboratory glassware – can be equipped with 32 nozzles.

A 301/5 Module
A 301/5Module

For optimum loading of laboratory glassware – can be equipped with 18 nozzles.

ProCare Lab 11 AP Powder cleaning agent, mildly alkaline, 10 kg
ProCare Lab 11 APPowder cleaning agent, mildly alkaline, 10 kg

for optimum reprocessing of laboratory utensils.

A 301/4 Module
A 301/4Module

For optimum loading of laboratory glassware – can be equipped with 18 nozzles. 

A 301/3 Module
A 301/3Module

for the optimum loading of butyrometers.

ProCare Lab 10 AP - 10 l Liquid detergent, alkaline, 10 l
ProCare Lab 10 AP - 10 lLiquid detergent, alkaline, 10 l

for optimum reprocessing of laboratory utensils.

E 315 Full demineralisation single use resin
E 315Full demineralisation single use resin

For the regeneration of full demineralization cartridges

E 316 Plastic barrel
E 316Plastic barrel

ideal for transferring single use resin.

E 319/4 Surface filter
E 319/4Surface filter

For optimum protection against contamination from labels or glass splinters.

A 842/3 Injector nozzle
A 842/3Injector nozzle

With plastic supports, nozzle diameter 4, length 90 mm, 20 items

ProCare Lab 10 AP - 5 l Liquid detergent, alkaline, 5 l
ProCare Lab 10 AP - 5 lLiquid detergent, alkaline, 5 l

for optimum reprocessing of laboratory utensils.

E 336 Irrigation sleeves
E 336Irrigation sleeves

for the optimum loading of pipettes/MIS instruments in injector units.

ProCare Lab 10 AT - 10 l Liquid detergent, alkaline, 10 l
ProCare Lab 10 AT - 10 lLiquid detergent, alkaline, 10 l

for optimum reprocessing of laboratory utensils.

E 351 Injector nozzle
E 351Injector nozzle

for the optimum cleaning of the wash items. Size 4 x 160 mm.

E 352 Injector nozzle
E 352Injector nozzle

for the optimum cleaning of the wash items.

A 2 Cover net
A 2Cover net

For fixing delicate wash items.

E 353 Clamps
E 353Clamps

Height-adjustable for optimum positioning of laboratory glassware on the nozzle.

E 354 Clamps
E 354Clamps

Height-adjustable for optimum positioning of laboratory glassware on the nozzle.

E 362 Blind stopper
E 362Blind stopper

for the sealing of fittings to load carriers.

A 200 Mobile unit
A 200Mobile unit

for the optimum loading of 38 pipettes.

E 402 Mesh Basket
E 402Mesh Basket

for optimum loading of up to 44 watch glasses.

E 403 Mesh Basket
E 403Mesh Basket

for optimum loading of up to 105 watch glasses.

A 202 Mobile unit
A 202Mobile unit

for the optimum loading of 4 DIN mesh trays.

XKM 3000 L Med Communication module
XKM 3000 L MedCommunication module

for connection to the Segosoft Miele Edition or other software.

ProCare Lab 10 AT - 5 l Liquid detergent, alkaline, 5 l
ProCare Lab 10 AT - 5 lLiquid detergent, alkaline, 5 l

for optimum reprocessing of laboratory utensils.

E 106/2 Mesh Basket
E 106/2Mesh Basket

for the optimum loading of wide neck flasks, measuring cylinders, etc.

E 109 Mesh Basket
E 109Mesh Basket

for the optimum loading of beakers up to 250 ml.

E 110 Mesh Basket
E 110Mesh Basket

for the optimum loading of beakers from 250 to 600 ml.

E 111 Mesh Basket
E 111Mesh Basket

for the optimum loading of beakers from 600 to 1,000 ml.

E 118 Mesh Basket
E 118Mesh Basket

for the optimum loading of petri dishes.

A 151 Lower basket
A 151Lower basket

For holding standard DIN mesh trays as well as various inserts.

ProCare Lab 10 AO - 5 l Liquid detergent, alkaline, 5 l
ProCare Lab 10 AO - 5 lLiquid detergent, alkaline, 5 l

for optimum reprocessing of laboratory utensils.

E 134 Mesh Basket
E 134Mesh Basket

for optimum loading of 210 slides.

A 860 Holding frames 
A 860Holding frames 

For injector modules A 300/2 and A 300/3

E 136 Mesh Basket
E 136Mesh Basket

for optimum loading of 56 half petri dishes.

A 861 Holding frames 
A 861Holding frames 

For injector modules A 301/4 and A 301/5

E 137 Mesh Basket
E 137Mesh Basket

for optimum loading of 56 half petri dishes.

E 139/1 Mesh Basket
E 139/1Mesh Basket

for the optimum loading of test tubes up to 12 x 200 mm.

E 144 Mesh Basket
E 144Mesh Basket

for the optimum loading of up to 18 beakers.

E 149 Mesh Basket
E 149Mesh Basket

for optimum loading of 80 test tubes, 16 x 105 mm.

A 842/1 Injector nozzle
A 842/1Injector nozzle

With plastic supports, nozzle diameter 4, length 90 mm, 5 items 

A 862 Holding frames 
A 862Holding frames 

For injector modules A 302/2 and A 302/3

A 842/2 Injector nozzle
A 842/2Injector nozzle

With plastic supports, nozzle diameter 4, length 90 mm, 10 items

ProCare Universal 61 Regeneration salt, 3 x 2 kg (13.2 lb total)
ProCare Universal 61Regeneration salt, 3 x 2 kg (13.2 lb total)

for regeneration of the integrated water softener.

ProCare Lab 10 MA - 10 l Liquid detergent, mildly alkaline, 10 l
ProCare Lab 10 MA - 10 lLiquid detergent, mildly alkaline, 10 l

for optimum reprocessing of laboratory glassware and utensils.

PG 8595 Aqua purificator
PG 8595Aqua purificator

for two full or partial demineralization cartridges.

PG 8596 Dispensing cabinet
PG 8596Dispensing cabinet

for process chemicals and dispenser modules

A 848 Injector nozzle
A 848Injector nozzle

With support, for cleaning measuring flasks.

A 843 Injector nozzle
A 843Injector nozzle

With plastic supports, nozzle diameter 4, length 185 mm, 1 item

A 3 Cover net
A 3Cover net

to cover for wash items in inserts.

E 470 Injector nozzle
E 470Injector nozzle

for use in the mobile injector unit, Ø 2.5 x 90 mm.

A 847 Injector nozzle
A 847Injector nozzle

With support, for cleaning Erlenmeyer flasks.

AK 12/1 Mesh Basket
AK 12/1Mesh Basket

AK 12 Mesh Basket
AK 12Mesh Basket

for holding different utensils.

VE P 2000 Full demineralization cartridge
VE P 2000Full demineralization cartridge

For optimum water preparation.

Illustration(s) as an example, for information
*SRP - all prices include VAT
**all prices include VAT, plus shipping costs