PG 8583 CD [WW AD CM] - Laboratory glassware washer
 

PG 8583 CD [WW AD CM]
Laboratory glassware washer
with liquid dispensing, DryPlus drying & conductivity monitoring.

  • Perf./cycle, e.g., 128 laboratory flasks

    Further stacking options

    Alternatively, 98 pipettes can be reprocessed per cycle with further laboratory glassware.
  • Efficient use of resources - variable speed heater pump

    The heart of perfect results

    In the individual programs the speed of the pump and thus the wash pressure is adjusted in line with the relevant requirements – high pressure facilitates the removal of stubborn soiling, whilst low pressure guarantees the complete wetting of all the wash items. As a result, the consumption of water and energy remains particularly low with optimum wash pressure at all times.
  • Safety - Wash pressure, spray arm and conductivity monitoring

    For reliable results

    Outstanding preparation results are achieved because the jet pressure and spray arms are monitored continuously and a decline in jet pressure or load blockage is detected immediately In addition, any deviations from the prescribed conductivity of the water, particularly in the final rinse, are detected.
  • Efficient hot air drying - DryPlus

    Efficient drying

    DryPlus hot air drying is the optimum solution for hollow instruments or narrow-lumened laboratory glassware. The upstream H14 HEPA filter ensures optimum particle separation from the drying air. The filter is easily accessible via a side unit.
PG8583 CD [WW AD CM]

Optional Accessories - PG 8583 CD [WW AD CM]

E 110 Mesh Basket
E 110Mesh Basket

for the optimum loading of beakers from 250 to 600 ml.

ProCare Lab 10 AO - 5 l Liquid detergent, alkaline, 5 l
ProCare Lab 10 AO - 5 lLiquid detergent, alkaline, 5 l

for optimum reprocessing of laboratory utensils.

A 842/1 Injector nozzle
A 842/1Injector nozzle

With plastic supports, nozzle diameter 4, length 90 mm, 5 items 

A 200 Mobile unit
A 200Mobile unit

for the optimum loading of 38 pipettes.

ProCare Lab 10 AT - 5 l Liquid detergent, alkaline, 5 l
ProCare Lab 10 AT - 5 lLiquid detergent, alkaline, 5 l

for optimum reprocessing of laboratory utensils.

E 106/2 Mesh Basket
E 106/2Mesh Basket

for the optimum loading of wide neck flasks, measuring cylinders, etc.

A 202 Mobile unit
A 202Mobile unit

for the optimum loading of 4 DIN mesh trays.

A 860 Holding frames 
A 860Holding frames 

For injector modules A 300/2 and A 300/3

A 151 Lower basket
A 151Lower basket

For holding standard DIN mesh trays as well as various inserts.

E 106/1 Mesh Basket
E 106/1Mesh Basket

for the optimum loading of wide neck flasks, measuring cylinders, etc.

E 111 Mesh Basket
E 111Mesh Basket

for the optimum loading of beakers from 600 to 1,000 ml.

E 109 Mesh Basket
E 109Mesh Basket

for the optimum loading of beakers up to 250 ml.

A 842/3 Injector nozzle
A 842/3Injector nozzle

With plastic supports, nozzle diameter 4, length 90 mm, 20 items

E 319/4 Surface filter
E 319/4Surface filter

For optimum protection against contamination from labels or glass splinters.

E 103/1 Mesh Basket
E 103/1Mesh Basket

For the optimum loading of test tubes up to 12 x 75 mm.

E 336 Irrigation sleeves
E 336Irrigation sleeves

for the optimum loading of pipettes/MIS instruments in injector units.

E 316 Plastic barrel
E 316Plastic barrel

ideal for transferring single use resin.

A 150 Lower basket
A 150Lower basket

For the optimum loading of injector modules or inserts.

E 315 Full demineralisation single use resin
E 315Full demineralisation single use resin

For the regeneration of full demineralization cartridges

ProCare Lab 10 AP - 10 l Liquid detergent, alkaline, 10 l
ProCare Lab 10 AP - 10 lLiquid detergent, alkaline, 10 l

for optimum reprocessing of laboratory utensils.

E 104/1 Mesh Basket
E 104/1Mesh Basket

for the optimum loading of test tubes up to 12 x 105 mm.

E 351 Injector nozzle
E 351Injector nozzle

for the optimum cleaning of the wash items. Size 4 x 160 mm.

ProCare Universal 61 Regeneration salt, 3 x 2 kg (13.2 lb total)
ProCare Universal 61Regeneration salt, 3 x 2 kg (13.2 lb total)

for regeneration of the integrated water softener.

A 2 Cover net
A 2Cover net

For fixing delicate wash items.

A 842/2 Injector nozzle
A 842/2Injector nozzle

With plastic supports, nozzle diameter 4, length 90 mm, 10 items

ProCare Lab 10 AP - 5 l Liquid detergent, alkaline, 5 l
ProCare Lab 10 AP - 5 lLiquid detergent, alkaline, 5 l

for optimum reprocessing of laboratory utensils.

E 352 Injector nozzle
E 352Injector nozzle

for the optimum cleaning of the wash items.

E 105/1 Mesh Basket
E 105/1Mesh Basket

for the optimum loading of test tubes up to 12 x 165 mm.

A 100 Upper basket
A 100Upper basket

For the optimum loading of injector modules or inserts.

E 149 Mesh Basket
E 149Mesh Basket

for optimum loading of 80 test tubes, 16 x 105 mm.

A 802 Jets
A 802Jets

for the optimum cleaning of the dispenser compartment.

E 144 Mesh Basket
E 144Mesh Basket

for the optimum loading of up to 18 beakers.

E 353 Clamps
E 353Clamps

Height-adjustable for optimum positioning of laboratory glassware on the nozzle.

E 139/1 Mesh Basket
E 139/1Mesh Basket

for the optimum loading of test tubes up to 12 x 200 mm.

E 137 Mesh Basket
E 137Mesh Basket

for optimum loading of 56 half petri dishes.

E 106 Mesh Basket
E 106Mesh Basket

for the optimum loading of wide neck flasks, measuring cylinders, etc.

E 354 Clamps
E 354Clamps

Height-adjustable for optimum positioning of laboratory glassware on the nozzle.

E 136 Mesh Basket
E 136Mesh Basket

for optimum loading of 56 half petri dishes.

A 862 Holding frames 
A 862Holding frames 

For injector modules A 302/2 and A 302/3

E 134 Mesh Basket
E 134Mesh Basket

for optimum loading of 210 slides.

ProCare Lab 10 AT - 10 l Liquid detergent, alkaline, 10 l
ProCare Lab 10 AT - 10 lLiquid detergent, alkaline, 10 l

for optimum reprocessing of laboratory utensils.

A 861 Holding frames 
A 861Holding frames 

For injector modules A 301/4 and A 301/5

E 118 Mesh Basket
E 118Mesh Basket

for the optimum loading of petri dishes.

E 362 Blind stopper
E 362Blind stopper

for the sealing of fittings to load carriers.

E 402 Mesh Basket
E 402Mesh Basket

for optimum loading of up to 44 watch glasses.

ProCare Lab 30 P - 5 l Acidic neutralizing agent, 5 l
ProCare Lab 30 P - 5 lAcidic neutralizing agent, 5 l

for optimum neutralization with phosphoric acid based neutralizing agent.

APH 530 Connection wire
APH 530Connection wire

For interruption-free connection to the printer.

UG 30-90/70-85 Closed base
UG 30-90/70-85Closed base

to raise the machine, 27.6 inches deep, 35.4 inches wide.

ProCare Lab 11 AP Powder cleaning agent, mildly alkaline, 10 kg
ProCare Lab 11 APPowder cleaning agent, mildly alkaline, 10 kg

for optimum reprocessing of laboratory utensils.

APH 500 PRT 100 Printer
APH 500 PRT 100Printer

for printing process reports.

A 844/3 Injector nozzle
A 844/3Injector nozzle

With plastic supports, nozzle diameter 2.5, length 80 mm, 20 items.

A 312 Module
A 312Module

For reprocessing viscometers.

A 14/1 Lid
A 14/1Lid

CK DIN 51 Canister key
CK DIN 51Canister key

For easy opening of ProCare 5 l and 10 l canisters.

A 840/1 Injector nozzle
A 840/1Injector nozzle

With plastic supports, nozzle diameter 6, length 130 mm, 5 items.

APH 407 Network cable
APH 407Network cable

for connection to the network, length 5 m (type 7).

A 306/1 Module
A 306/1Module

For the optimum loading of large-volume laboratory glassware. 

APH 406 Network cable
APH 406Network cable

for connection to the network, length 3 m (type 6).

APH 305 Extension cable
APH 305Extension cable

10 m, for the extension of connection cable type 1 and 2.

A 841/1 Injector nozzle
A 841/1Injector nozzle

With plastic supports, nozzle diameter 6, length 210 mm, 5 items 

A 845/2 Injector nozzle
A 845/2Injector nozzle

With plastic supports, nozzle diameter 2.5, length 125 mm, 10 items.

XKM RS232 10 Med Communication module
XKM RS232 10 MedCommunication module

for connection to the Segosoft USB solution/report printer PRT 100.

A 306 Module
A 306Module

for the optimum loading of large volume laboratory glassware.

A 11/1 Mesh Basket
A 11/1Mesh Basket

For the gentle cleaning of delicate items by interrupting the spray jet.

APH 304 Extension cable
APH 304Extension cable

5 m, for the extension of connection cable type 1 and 2.

A 840/3 Injector nozzle
A 840/3Injector nozzle

With plastic supports, nozzle diameter 6, length 130 mm, 20 items.

A 844/2 Injector nozzle
A 844/2Injector nozzle

With plastic supports, nozzle diameter 2.5, length 80 mm, 10 items. 

A 845/3 Injector nozzle
A 845/3Injector nozzle

With plastic supports, nozzle diameter 2.5, length 125 mm, 20 items. 

A 845/1 Injector nozzle
A 845/1Injector nozzle

With plastic supports, nozzle diameter 2.5, length 125 mm, 5 items.

LP 2800 Demineralisation cartridge, empty
LP 2800Demineralisation cartridge, empty

For the manual filling of single use resins.

A 840/2 Injector nozzle
A 840/2Injector nozzle

With plastic supports, nozzle diameter 6, length 130 mm, 10 items.

A 12/1 Mesh Basket
A 12/1Mesh Basket

For the gentle cleaning of delicate items by interrupting the spray jet.

ID 90 Injector nozzle
ID 90Injector nozzle

with plastic supports, Ø 0 1/8 (3), length 90 mm.

ID 240 Injector nozzle
ID 240Injector nozzle

with plastic supports, Ø 0 1/4 (6), length 240 mm.

ID 220 Injector nozzle
ID 220Injector nozzle

with plastic supports, Ø 0 1/4 (6), length 220 mm.

ID 200 Injector nozzle
ID 200Injector nozzle

with plastic supports, Ø 0 1/4 (6), length 200 mm.

ID 180 Injector nozzle
ID 180Injector nozzle

with plastic supports, Ø 0 1/4 (4), length 180 mm.

A 841 Injector nozzle
A 841Injector nozzle

With plastic supports, nozzle diameter 6, length 210 mm, 1 item

ID 160 Injector nozzle
ID 160Injector nozzle

with plastic supports, Ø 0 1/4 (4), length 160 mm.

A 313 Module
A 313Module

For reprocessing large-volume laboratory glassware.

ID 140 Injector nozzle
ID 140Injector nozzle

with plastic supports, Ø 0 1/4 (4), length 140 mm.

ID 110 Injector nozzle
ID 110Injector nozzle

with plastic supports, Ø 0 1/8 (3), length 110 mm.

CM/1 Conductivity meter
CM/1Conductivity meter

For measuring the conductivity level and the display for changing the cartridge.

A 846 Injector nozzle
A 846Injector nozzle

With support, for cleaning laboratory flasks and round flasks.

APH 591 Paper roll
APH 591Paper roll

for APH 500 PRT100 and APH 510 PRT110 report printer.

ProCare Lab 30 C - 10 l Acidic neutralizing agent, 10 l
ProCare Lab 30 C - 10 lAcidic neutralizing agent, 10 l

for optimum neutralization with citric acid based neutralizing agent.

APH 590 Ink cartridge
APH 590Ink cartridge

for PRT 100 report printer.

A 845 Injector nozzle
A 845Injector nozzle

With plastic supports, nozzle diameter 2.5, length 125 mm, 1 item.

ProCare Lab 30 C - 5 l Acidic neutralizing agent, 5 l
ProCare Lab 30 C - 5 lAcidic neutralizing agent, 5 l

for optimum neutralization with citric acid based neutralizing agent.

A 11/2 Mesh Basket
A 11/2Mesh Basket

For the gentle cleaning of delicate wash items by interrupting the spray jet.

ProCare Lab 30 P - 12 kg Acidic neutralizing agent, 12 kg
ProCare Lab 30 P - 12 kgAcidic neutralizing agent, 12 kg

For optimum neutralization with phosphoric acid based neutralizing agent.

ProCare Lab 11 MA Powder cleaning agent, mildly alkaline, 10 kg
ProCare Lab 11 MAPowder cleaning agent, mildly alkaline, 10 kg

for optimum reprocessing of laboratory utensils.

A 300/1 Module
A 300/1Module

for the optimum loading of laboratory glassware.

A 844/1 Injector nozzle
A 844/1Injector nozzle

With plastic supports, nozzle diameter 2.5, length 80 mm, 5 items.

A 102 Upper basket
A 102Upper basket

Height adjustable, for the optimum loading of inserts.

A 844 Injector nozzle
A 844Injector nozzle

With plastic supports, nozzle diameter 2.5, length 80 mm, 1 item.

A 300 Module
A 300Module

for the optimum loading of laboratory glassware.

A 843/3 Injector nozzle
A 843/3Injector nozzle

With plastic supports, nozzle diameter 4, length 185 mm, 20 items

A 838 Key set
A 838Key set

For setting basket heights and assembling/dismantling injector nozzles.

AK 12/1 Mesh Basket
AK 12/1Mesh Basket

A 843/2 Injector nozzle
A 843/2Injector nozzle

With plastic supports, nozzle diameter 4, length 185 mm, 10 items

AK 12 Mesh Basket
AK 12Mesh Basket

for holding different utensils.

A 843/1 Injector nozzle
A 843/1Injector nozzle

With plastic supports, nozzle diameter 4, length 185 mm, 5 items

A 14 Lid
A 14Lid

For fixing delicate wash items.

A 101 Upper basket
A 101Upper basket

Height adjustable, for the optimum loading of inserts.

A 843 Injector nozzle
A 843Injector nozzle

With plastic supports, nozzle diameter 4, length 185 mm, 1 item

XKM 3000 L Med Communication module
XKM 3000 L MedCommunication module

for connection to the Segosoft Miele Edition or other software.

A 3 Cover net
A 3Cover net

to cover for wash items in inserts.

E 470 Injector nozzle
E 470Injector nozzle

for use in the mobile injector unit, Ø 2.5 x 90 mm.

A 842 Injector nozzle
A 842Injector nozzle

With plastic supports, nozzle diameter 4, length 90 mm, 1 item 

VE P 2000 Full demineralization cartridge
VE P 2000Full demineralization cartridge

For optimum water preparation.

ProCare Lab 10 MA - 10 l Liquid detergent, mildly alkaline, 10 l
ProCare Lab 10 MA - 10 lLiquid detergent, mildly alkaline, 10 l

for optimum reprocessing of laboratory glassware and utensils.

E 403 Mesh Basket
E 403Mesh Basket

for optimum loading of up to 105 watch glasses.

APH 303 Extension cable
APH 303Extension cable

3 m, for the extension of connection cable type 1 and 2.

A 304 Module
A 304Module

for the optimum loading of up to 98 vials.

A 303 Module
A 303Module

for the optimum loading of up to 98 pipettes.

A 103 Upper basket
A 103Upper basket

For the optimum loading of inserts.

A 302/3 Module
A 302/3Module

For optimum loading of laboratory glassware – can be equipped with 32 nozzles.

A 847 Injector nozzle
A 847Injector nozzle

With support, for cleaning Erlenmeyer flasks.

A 302/2 Module
A 302/2Module

For optimum loading of laboratory glassware – can be equipped with 32 nozzles.

A 301/5 Module
A 301/5Module

For optimum loading of laboratory glassware – can be equipped with 18 nozzles.

A 301/4 Module
A 301/4Module

For optimum loading of laboratory glassware – can be equipped with 18 nozzles. 

A 840 Injector nozzle
A 840Injector nozzle

With plastic supports, nozzle diameter 6, length 130 mm, 1 item. 

A 841/2 Injector nozzle
A 841/2Injector nozzle

With plastic supports, nozzle diameter 6, length 210 mm, 10 items 

A 841/3 Injector nozzle
A 841/3Injector nozzle

With plastic supports, nozzle diameter 6, length 210 mm, 20 items

PG 8596 Dispensing cabinet
PG 8596Dispensing cabinet

for process chemicals and dispenser modules

A 300/2 Module
A 300/2Module

For optimum loading of laboratory glassware – can be equipped with 8 nozzles.

PG 8595 Aqua purificator
PG 8595Aqua purificator

for two full or partial demineralization cartridges.

A 300/3 Module
A 300/3Module

For optimum loading of laboratory glassware – can be equipped with 8 nozzles. 

A 848 Injector nozzle
A 848Injector nozzle

With support, for cleaning measuring flasks.

A 301/2 Module
A 301/2Module

for the optimum loading of laboratory glassware.

A 301/3 Module
A 301/3Module

for the optimum loading of butyrometers.

A 12/2 Mesh Basket
A 12/2Mesh Basket

For the gentle cleaning of delicate wash items by interrupting the spray jet.

Illustration(s) as an example, for information
*SRP - all prices include VAT
**all prices include VAT, plus shipping costs