PG 8583 [WW AD PD 208V] - Laboratory glassware washer
 

PG 8583 [WW AD PD 208V]
Laboratory glassware washer
with powder dispensing & EcoDry function.

  • Perf./cycle, e.g., 128 laboratory flasks

    Further stacking options

    Alternatively, 98 pipettes can be reprocessed per cycle with further laboratory glassware.
  • Efficient use of resources - variable speed heater pump

    The heart of perfect results

    In the individual programs the speed of the pump and thus the wash pressure is adjusted in line with the relevant requirements – high pressure facilitates the removal of stubborn soiling, whilst low pressure guarantees the complete wetting of all the wash items. As a result, the consumption of water and energy remains particularly low with optimum wash pressure at all times.
  • Safety through monitoring - wash pressure and spray arm monitoring

    For reliable results

    Outstanding preparation results are achieved because the jet pressure and spray arms are monitored continuously and a decline in jet pressure or load blockage is detected immediately
  • Convenient drying support - EcoDry

    Unique

    At the end of the reprocessing program the machine door opens automatically as soon as the temperature in the wash cabinet has fallen below 158°F, thanks to the AutoOpen function. This allows residual moisture to escape easily from the wash cabinet and the washed items to dry more quickly.
  • Total security - link to process documentation possible

    End-to-end documentation

    The optional addition of a module for process documentation is provided via a communication slot. The Ethernet module is used for documentation via software. The RS 232 module must be used for documentation within a USB solution or via a printer.
PG8583 [WW AD PD 208V]

Optional Accessories - PG 8583 [WW AD PD 208V]

A 312 Module
A 312Module

For reprocessing viscometers.

A 306/1 Module
A 306/1Module

For the optimum loading of large-volume laboratory glassware. 

E 106 Mesh Basket
E 106Mesh Basket

for the optimum loading of wide neck flasks, measuring cylinders, etc.

A 304 Module
A 304Module

for the optimum loading of up to 98 vials.

A 303 Module
A 303Module

for the optimum loading of up to 98 pipettes.

A 302/3 Module
A 302/3Module

For optimum loading of laboratory glassware – can be equipped with 32 nozzles.

E 362 Blind stopper
E 362Blind stopper

for the sealing of fittings to load carriers.

A 302/2 Module
A 302/2Module

For optimum loading of laboratory glassware – can be equipped with 32 nozzles.

A 842 Injector nozzle
A 842Injector nozzle

With plastic supports, nozzle diameter 4, length 90 mm, 1 item 

A 301/5 Module
A 301/5Module

For optimum loading of laboratory glassware – can be equipped with 18 nozzles.

XKM RS232 10 Med Communication module
XKM RS232 10 MedCommunication module

with serial interface (RS232) for connection to a printer.

A 301/4 Module
A 301/4Module

For optimum loading of laboratory glassware – can be equipped with 18 nozzles. 

A 200 Mobile unit
A 200Mobile unit

for the optimum loading of 38 pipettes.

E 470 Injector nozzle
E 470Injector nozzle

for use in the mobile injector unit, Ø 2.5 x 90 mm.

A 300/3 Module
A 300/3Module

For optimum loading of laboratory glassware – can be equipped with 8 nozzles. 

A 300/2 Module
A 300/2Module

For optimum loading of laboratory glassware – can be equipped with 8 nozzles.

DTD 2 Drip tray 
DTD 2Drip tray 

For the secure placement of media canisters. 

A 3 Cover net
A 3Cover net

to cover for wash items in inserts.

E 105/1 Mesh Basket
E 105/1Mesh Basket

for the optimum loading of test tubes up to 12 x 165 mm.

E 403 Mesh Basket
E 403Mesh Basket

for optimum loading of up to 105 watch glasses.

A 202 Mobile unit
A 202Mobile unit

for the optimum loading of 4 DIN mesh trays.

E 402 Mesh Basket
E 402Mesh Basket

for optimum loading of up to 44 watch glasses.

A 842/1 Injector nozzle
A 842/1Injector nozzle

With plastic supports, nozzle diameter 4, length 90 mm, 5 items 

UGT F10 Feet
UGT F10Feet

for the base UGT 44-60/85.

UGT 44-60/85
UGT 44-60/85

for ergonomic loading and unloading of the machine.

E 351 Injector nozzle
E 351Injector nozzle

for the optimum cleaning of the wash items. Size 4 x 160 mm.

UG 70-60/80 Base with door 
UG 70-60/80Base with door 

for the ergonomic loading and unloading of a dishwasher - height 27.6 inches.

UG 30-90/60-85 Closed base
UG 30-90/60-85Closed base

to raise the machine incl. side unit, 23.6 inches deep, 35.4 inches wide.

E 319/4 Surface filter
E 319/4Surface filter

For optimum protection against contamination from labels or glass splinters.

A 841 Injector nozzle
A 841Injector nozzle

With plastic supports, nozzle diameter 6, length 210 mm, 1 item

UG 30-60/60-85 Closed base
UG 30-60/60-85Closed base

to raise the machine, 23..6 inches deep and wide

A 840/3 Injector nozzle
A 840/3Injector nozzle

With plastic supports, nozzle diameter 6, length 130 mm, 20 items.

A 802 Jets
A 802Jets

for the optimum cleaning of the dispenser compartment.

A 838 Key set
A 838Key set

For setting basket heights and assembling/dismantling injector nozzles.

E 336 Irrigation sleeves
E 336Irrigation sleeves

for the optimum loading of pipettes/MIS instruments in injector units.

A 840 Injector nozzle
A 840Injector nozzle

With plastic supports, nozzle diameter 6, length 130 mm, 1 item. 

A 840/1 Injector nozzle
A 840/1Injector nozzle

With plastic supports, nozzle diameter 6, length 130 mm, 5 items.

A 840/2 Injector nozzle
A 840/2Injector nozzle

With plastic supports, nozzle diameter 6, length 130 mm, 10 items.

A 151 Lower basket
A 151Lower basket

For holding standard DIN mesh trays as well as various inserts.

E 316 Plastic barrel
E 316Plastic barrel

ideal for transferring single use resin.

A 841/3 Injector nozzle
A 841/3Injector nozzle

With plastic supports, nozzle diameter 6, length 210 mm, 20 items

A 313 Module
A 313Module

For reprocessing large-volume laboratory glassware.

E 354 Clamps
E 354Clamps

Height-adjustable for optimum positioning of laboratory glassware on the nozzle.

XKM 3000 L Med Communication module
XKM 3000 L MedCommunication module

with Ethernet interface for integration in a network.

APH 591 Paper roll
APH 591Paper roll

for protocol printer APH 500 PRT100 and APH 510 PRT110.

E 104/1 Mesh Basket
E 104/1Mesh Basket

for the optimum loading of test tubes up to 12 x 105 mm.

A 841/2 Injector nozzle
A 841/2Injector nozzle

With plastic supports, nozzle diameter 6, length 210 mm, 10 items 

APH 590 Ink cartridge
APH 590Ink cartridge

for PRT 100 report printer.

E 106/2 Mesh Basket
E 106/2Mesh Basket

for the optimum loading of wide neck flasks, measuring cylinders, etc.

E 353 Clamps
E 353Clamps

Height-adjustable for optimum positioning of laboratory glassware on the nozzle.

E 103/1 Mesh Basket
E 103/1Mesh Basket

For the optimum loading of test tubes up to 12 x 75 mm.

APH 530 Connection wire
APH 530Connection wire

For interruption-free connection to the printer.

APH 500 PRT 100 Report printer
APH 500 PRT 100Report printer

for printing process reports.

VE P 2000 Full demineralization cartridge
VE P 2000Full demineralization cartridge

For optimum water preparation.

E 352 Injector nozzle
E 352Injector nozzle

for the optimum cleaning of the wash items.

A 841/1 Injector nozzle
A 841/1Injector nozzle

With plastic supports, nozzle diameter 6, length 210 mm, 5 items 

A 2 Cover net
A 2Cover net

For fixing delicate wash items.

E 106/1 Mesh Basket
E 106/1Mesh Basket

for the optimum loading of wide neck flasks, measuring cylinders, etc.

PG 8596 Dispensing cabinet
PG 8596Dispensing cabinet

for process chemicals and dispenser modules

E 136 Mesh Basket
E 136Mesh Basket

for optimum loading of 56 half petri dishes.

PG 8595 Aqua purificator
PG 8595Aqua purificator

for two full or partial demineralization cartridges.

A 103 Upper basket
A 103Upper basket

For the optimum loading of inserts.

A 101 Upper basket
A 101Upper basket

Height adjustable, for the optimum loading of inserts.

A 860 Holding frames 
A 860Holding frames 

For injector modules A 300/2 and A 300/3

A 845/1 Injector nozzle
A 845/1Injector nozzle

With plastic supports, nozzle diameter 2.5, length 125 mm, 5 items.

A 861 Holding frames 
A 861Holding frames 

For injector modules A 301/4 and A 301/5

A 11/2 Mesh Basket
A 11/2Mesh Basket

For the gentle cleaning of delicate wash items by interrupting the spray jet.

E 134 Mesh Basket
E 134Mesh Basket

for optimum loading of 210 slides.

AK 12/1 Mesh Basket
AK 12/1Mesh Basket

for holding different utensils.

CM/1 Conductivity meter
CM/1Conductivity meter

For measuring the conductivity level and the display for changing the cartridge.

A 862 Holding frames 
A 862Holding frames 

For injector modules A 302/2 and A 302/3

A 845 Injector nozzle
A 845Injector nozzle

With plastic supports, nozzle diameter 2.5, length 125 mm, 1 item.

ProCare Lab 11 AP Powder cleaning agent, mildly alkaline, 10 kg
ProCare Lab 11 APPowder cleaning agent, mildly alkaline, 10 kg

for optimum reprocessing of laboratory utensils.

A 12/2 Mesh Basket
A 12/2Mesh Basket

For the gentle cleaning of delicate wash items by interrupting the spray jet.

ID 90 Injector nozzle
ID 90Injector nozzle

with plastic supports, Ø 0 1/8 (3), length 90 mm.

ProCare Lab 10 MA - 10 l Liquid detergent, mildly alkaline, 10 l
ProCare Lab 10 MA - 10 lLiquid detergent, mildly alkaline, 10 l

for optimum reprocessing of laboratory glassware and utensils.

E 139/1 Mesh Basket
E 139/1Mesh Basket

for the optimum loading of test tubes up to 12 x 200 mm.

A 845/3 Injector nozzle
A 845/3Injector nozzle

With plastic supports, nozzle diameter 2.5, length 125 mm, 20 items. 

ID 240 Injector nozzle
ID 240Injector nozzle

with plastic supports, Ø 0 1/4 (6), length 240 mm.

DOS K 85 Dispenser module for 5-10 liter canisters
DOS K 85Dispenser module for 5-10 liter canisters

With level indicator for the automatic dispensing of liquid cleaning agents.

ProCare Lab 10 AT - 5 l Liquid detergent, alkaline, 5 l
ProCare Lab 10 AT - 5 lLiquid detergent, alkaline, 5 l

for optimum reprocessing of laboratory utensils.

ProCare Lab 10 AP - 5 l Liquid detergent, alkaline, 5 l
ProCare Lab 10 AP - 5 lLiquid detergent, alkaline, 5 l

for optimum reprocessing of laboratory utensils.

ID 220 Injector nozzle
ID 220Injector nozzle

with plastic supports, Ø 0 1/4 (6), length 220 mm.

E 144 Mesh Basket
E 144Mesh Basket

for the optimum loading of up to 18 beakers.

LP 2800 Demineralisation cartridge, empty
LP 2800Demineralisation cartridge, empty

For the manual filling of single use resins.

ProCare Lab 10 MA - 5 l Liquid detergent, mildly alkaline, 5 l
ProCare Lab 10 MA - 5 lLiquid detergent, mildly alkaline, 5 l

for optimum reprocessing of laboratory glassware and utensils.

ID 200 Injector nozzle
ID 200Injector nozzle

with plastic supports, Ø 0 1/4 (6), length 200 mm.

ProCare Lab 10 AP - 10 l Liquid detergent, alkaline, 10 l
ProCare Lab 10 AP - 10 lLiquid detergent, alkaline, 10 l

for optimum reprocessing of laboratory utensils.

ProCare Lab 10 AO - 5 l Liquid detergent, alkaline, 5 l
ProCare Lab 10 AO - 5 lLiquid detergent, alkaline, 5 l

for optimum reprocessing of laboratory utensils.

E 109 Mesh Basket
E 109Mesh Basket

for the optimum loading of beakers up to 250 ml.

A 846 Injector nozzle
A 846Injector nozzle

With support, for cleaning laboratory flasks and round flasks.

E 137 Mesh Basket
E 137Mesh Basket

for optimum loading of 56 half petri dishes.

ID 180 Injector nozzle
ID 180Injector nozzle

with plastic supports, Ø 0 1/4 (4), length 180 mm.

DOS K 85/1 Dispenser module for 5 liter canister
DOS K 85/1Dispenser module for 5 liter canister

With level indicator for the automatic dispensing of liquid cleaning agents.

A 847 Injector nozzle
A 847Injector nozzle

With support, for cleaning Erlenmeyer flasks.

ID 160 Injector nozzle
ID 160Injector nozzle

with plastic supports, Ø 0 1/4 (4), length 160 mm.

A 102 Upper basket
A 102Upper basket

Height adjustable, for the optimum loading of inserts.

ID 140 Injector nozzle
ID 140Injector nozzle

with plastic supports, Ø 0 1/4 (4), length 140 mm.

ID 110 Injector nozzle
ID 110Injector nozzle

with plastic supports, Ø 0 1/8 (3), length 110 mm.

MC/2 Transfer trolley
MC/2Transfer trolley

height adjustable, for loading & unloading washer-&disinfectors.

E 149 Mesh Basket
E 149Mesh Basket

for optimum loading of 80 test tubes, 16 x 105 mm.

A 848 Injector nozzle
A 848Injector nozzle

With support, for cleaning measuring flasks.

A 845/2 Injector nozzle
A 845/2Injector nozzle

With plastic supports, nozzle diameter 2.5, length 125 mm, 10 items.

ProCare Lab 30 C - 10 l Neutralizing agent, acidic, 10 l
ProCare Lab 30 C - 10 lNeutralizing agent, acidic, 10 l

for optimum neutralization with citric acid based neutralizing agent.

A 150 Lower basket
A 150Lower basket

For the optimum loading of injector modules or inserts.

ProCare Lab 30 C - 5 l Neutralizing agent, acidic, 5 l
ProCare Lab 30 C - 5 lNeutralizing agent, acidic, 5 l

for optimum neutralization with citric acid based neutralizing agent.

A 843 Injector nozzle
A 843Injector nozzle

With plastic supports, nozzle diameter 4, length 185 mm, 1 item

ProCare Lab 30 P - 5 l Neutralizing agent, acidic, 5 l
ProCare Lab 30 P - 5 lNeutralizing agent, acidic, 5 l

for optimum neutralization with phosphoric acid based neutralizing agent.

A 843/1 Injector nozzle
A 843/1Injector nozzle

With plastic supports, nozzle diameter 4, length 185 mm, 5 items

E 118 Mesh Basket
E 118Mesh Basket

for the optimum loading of petri dishes.

E 111 Mesh Basket
E 111Mesh Basket

for the optimum loading of beakers from 600 to 1,000 ml.

A 844/1 Injector nozzle
A 844/1Injector nozzle

With plastic supports, nozzle diameter 2.5, length 80 mm, 5 items.

A 100 Upper basket
A 100Upper basket

For the optimum loading of injector modules or inserts.

A 843/2 Injector nozzle
A 843/2Injector nozzle

With plastic supports, nozzle diameter 4, length 185 mm, 10 items

A 843/3 Injector nozzle
A 843/3Injector nozzle

With plastic supports, nozzle diameter 4, length 185 mm, 20 items

E 110 Mesh Basket
E 110Mesh Basket

for the optimum loading of beakers from 250 to 600 ml.

A 844 Injector nozzle
A 844Injector nozzle

With plastic supports, nozzle diameter 2.5, length 80 mm, 1 item.

E 315 Full demineralisation single use resin
E 315Full demineralisation single use resin

For the regeneration of full demineralization cartridges

A 844/3 Injector nozzle
A 844/3Injector nozzle

With plastic supports, nozzle diameter 2.5, length 80 mm, 20 items.

ProCare Universal 61 Regeneration salt, 3 x 2 kg (13.2 lb total)
ProCare Universal 61Regeneration salt, 3 x 2 kg (13.2 lb total)

for regeneration of the integrated water softener.

A 842/2 Injector nozzle
A 842/2Injector nozzle

With plastic supports, nozzle diameter 4, length 90 mm, 10 items

A 14/1 Lid
A 14/1Lid

for securing delicate wash items.

A 844/2 Injector nozzle
A 844/2Injector nozzle

With plastic supports, nozzle diameter 2.5, length 80 mm, 10 items. 

A 842/3 Injector nozzle
A 842/3Injector nozzle

With plastic supports, nozzle diameter 4, length 90 mm, 20 items

Illustration(s) as an example, for information
*SRP - all prices include VAT
**all prices include VAT, plus shipping costs